Gear Selector

Post by **Tim Leech** » Tue Mar 16, 2010 11:09 am

Does anyone have a AUTOMATIC gear indicator with the list of gears i.e. P R N A 3 2 1 to the RIGHT of the gear lever, I know they are rare but its worth asking, my TZi has it on the left which is hard to read.

Ta!

Jaba · Post by **Jaba** » Thu Mar 18, 2010 9:47 pm

I might have.
Send me a pm in May when I will be able to check for you....

citronut · Post by **citronut** » Thu Mar 18, 2010 11:24 pm

i have got a BX auto stick with cable still attached, it came from a B reg i converted to manual a good few year ago, not sure which side the indicator is but will try and find it tomorow,

regards malcolm

ken newbold · Post by **ken newbold** » Thu Mar 18, 2010 11:27 pm

Gold dust

Those cables are now extinct! last price was about £100

Post by **docchevron** » Thu Mar 18, 2010 11:31 pm

Erm, just take the lid off, heat the plastic tabs and turn the strip up t'other way, then refit the lid the other way round.
Cost = nil.

Post by **Tim Leech** » Fri Mar 19, 2010 9:02 am

Thanks for the offers chaps. Would prefer one I can just fit without any alterations!

Post by **docchevron** » Fri Mar 19, 2010 10:08 pm

Any unit you get will have been modded, since they were all made for LHD cars.

It's only a 10 minute job to do..

Post by **Tim Leech** » Sat Mar 20, 2010 8:34 am

OK Doc thanks.

Post by **Tim Leech** » Sun Mar 28, 2010 8:01 pm

Well it took more like 2 hours to do it then 10 minutes, and was a real pain as the gear selector lever arm kept fowling the bulb holder for the shift patter and I'm not 100% sure it will last indefinately but it works! I managed to cook the dash rheostat in the process mind you so need a new on