I wish to thank fellow members for their help over the last few days.
But another question.
Are the BX's CV joints removed in the same manner as the BL mini's in other words a sharp smack with a copper mallet
Thanking you in advance
Rick
CV joints
- ken newbold
- Over 2k
- Posts: 4408
- Joined: Sun Aug 14, 2005 10:53 pm
- x 5
Well actually,
Most of them do, BUT some of the later K & L reg ones have a different CV joint on the end which has a different number of splines. The problem with these is, they don't come off you have to remove the inner joint first and then slide the boot off from that end.
My suggestion if you come across one of these is BIN IT and fit a new or at least different shaft.
Most of them do, BUT some of the later K & L reg ones have a different CV joint on the end which has a different number of splines. The problem with these is, they don't come off you have to remove the inner joint first and then slide the boot off from that end.
My suggestion if you come across one of these is BIN IT and fit a new or at least different shaft.
They think it's all over, it is now!