Mat's BX Blog

Tell us about life with your BX, or indeed life in general!
Post Reply
User avatar
saintjamesy89
1K Away
Posts: 1994
Joined: Tue May 04, 2010 8:01 pm
Location: Somerset
My Cars: 1985 Citroen BX19 GT
198x Citroen BX16 TRS auto
1988 Volvo 740 2.0 GL Hearse
1991 Saab 900 16v convertible
2007 Lexus RX 400h SE
x 123

Post by saintjamesy89 »

Cor, that looks and sounds like it was fantastic! My journey home was 4.5 hours of motorway dullness... But there are 10 mins of fun lanes just before I get home, so woke up then, astra felt more grippy than usual (wouldn't take much!) maybe the tyres were hot :D

It was nice to meet you Matt, but I meant to ask for a ride in your BX to sample 1.9 turbo diesel powah. Do you swap at the ICCCR, ride in GT for ride in 1.9td??
I'm not a Saint, or a James, but a Tom Saint-James!

Mes voitures:
1985 Citroen BX19 GT
1988 Volvo 740 2.0 GL Hearse
2006 Lexus RX 400h SE hybrid
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Post by mat_fenwick »

You should have said! I remember you asking about the performance but subtlety will get you nowhere - I'm a bloke :lol:

TBH after its winter hibernation I thought it felt a tad flat and slightly smoky, even on the way to the event today. But maybe the sustained high speed run on the way back blew out the cobwebs? Best way to describe it is surfing on a huge wave of torque, and in that way is easier to drive than a 16v because the performance is instantly available if on boost (rather than having to drop a gear or two).
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
User avatar
Vanny
Merseyside resident
Posts: 3581
Joined: Tue May 17, 2005 11:48 pm
Location: BXProject
My Cars: BX 16v Ph2 - Jazz
BX 16v Ph2 - XPO
x 79
Contact:

Post by Vanny »

mat_fenwick wrote:slightly smoky,
Slightly smoky? Only Slightly? You need to travel behind it at some point! I never saw a single roundabout or hill when following, due to the all encompassing nature of your rear end smog making!
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Post by mat_fenwick »

Yeah, I kept catching it off boost which didn't help, but normally I can't see any smoke from the driver's seat (unless I deliberately induce it).

In other news, is this the first BX with a USB socket?

Image

Image

Image

I prefer to avoid trailing wires across the dash as much as possible, so this seemed the best solution.
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
User avatar
Paul296
Over 2k
Posts: 3483
Joined: Wed Nov 03, 2010 10:39 pm
Location: Newark Nottinghamshire
My Cars: Citroen BX 17 TZD Hurricane
Citroen BX 17 TGD

Post by Paul296 »

mat_fenwick wrote: trailing wires across the dash
^ I HATE those! That is really neat 8)
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Post by mat_fenwick »

It was quite tricky getting the hole in the right position - any higher and it would catch on the seam, and lower and it wouldn't sit flush due to the curve of the tray. I guess I could have turned it 90 degrees to give more clearance, but then I'd always be trying to remember which way round it was (I've made sure it's the right way up as it is!)

On the subject of trailing wires, this is what I have to run the rest of the electrical items in the car (plus a cigarette lighter in the boot to keep a mini torch permanently charged).

Image

The multiway socket was a cheap eBay buy, but re-wired with cable capable of taking more than about an amp!
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
User avatar
toddao
BXpat
Posts: 2833
Joined: Fri Jan 12, 2007 5:01 pm
Location: The Hegau

Post by toddao »

More electrical outlets than Currys! Is that a standard BX cigarette lighter on the back of the central console?

Those pics of your drive back are great..
Todd


this yellow writing is really hard to read
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Post by mat_fenwick »

toddao wrote:Is that a standard BX cigarette lighter on the back of the central console?
No, as standard it had a socket like the one on the dash in your van. DIN 4165 I think.

Just finished swapping the heater tap, what a complete and utter bastard of a job! I did ask myself several times "Why am I doing this?"

Also noticed a crack starting on the throttle pedal bracket. Still, at least taking it out will give me the chance to take out that nasty spring under the brake pedal!
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
User avatar
Vanny
Merseyside resident
Posts: 3581
Joined: Tue May 17, 2005 11:48 pm
Location: BXProject
My Cars: BX 16v Ph2 - Jazz
BX 16v Ph2 - XPO
x 79
Contact:

Post by Vanny »

mat_fenwick wrote: at least taking it out will give me the chance to take out that nasty spring under the brake pedal!
I've heard taking it out doesn't make much difference. It supposedly doesn't come into play until your pressing really hard, the initial effort is meant to be the same. I'll be interested to see how you get on without it.
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Post by mat_fenwick »

Hmmm, all I wan't to achieve is a similar feel to the Mk1 BX, and other older Citroens. I.e. very little pedal movement, just touch sensitive brakes. Someone did mention that ABS brakes felt significantly different, and I'm now wondering if that's the reason?

I had planned to take plenty of photos last night; I managed this...

Image

...but then it went dark, as did my mood :evil:
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
Mickey taker
Over 2k
Posts: 3209
Joined: Wed Apr 01, 2009 10:38 pm
Location: M K
x 1

Post by Mickey taker »

mat_fenwick wrote:Image
Mat , how do you remove the black plastic cover that sits under the front of the seat on the floor ( as seen just to the right of your socket/spanner,
do you have to remove the seat to get it out?

I wanted to take it out to make getting the sub and rear speaker wiring through easier or am I better off just passing the wires through one of the slots ?
1991 BX Meteor 1.6

light travels faster than sound, thats why you look intelligent and then you spoil it all by opening your mouth !!!!!
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Post by mat_fenwick »

Ooh, I dunno mate, not without having a look (I've left the pedal box welding 'till tomorrow given the rain tonight). It's not part of the side trim so can't see why you'd need to take the seat out. But also can't really see what you'd gain - where are you planning to put stuff?
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
Mickey taker
Over 2k
Posts: 3209
Joined: Wed Apr 01, 2009 10:38 pm
Location: M K
x 1

Post by Mickey taker »

running cables from head unit to boot , have removed side trim to lift carpet but was going to run the wires next to the loom which passes under the red (in your car) piece of metal that the front seat mounts are in
1991 BX Meteor 1.6

light travels faster than sound, thats why you look intelligent and then you spoil it all by opening your mouth !!!!!
User avatar
themildbunch
BXpert
Posts: 592
Joined: Fri Apr 30, 2010 9:38 pm
Location: Stroud, UK
x 5
Contact:

Post by themildbunch »

mat_fenwick wrote:
Also noticed a crack starting on the throttle pedal bracket. Still, at least taking it out will give me the chance to take out that nasty spring under the brake pedal!
Mine's been split for ages - attempted to take the pedal box out 6 months ago but was stuck on that crazy clutch cable fixing and decided to leave alone as we were going on holiday the next day... Did a quick weld up the seem with it installed but this only held for a few months... I'd love to see some images and clever tricks to detach and reattach the clutch cable if you attempt it...
1988 BX 19 Gti 16v
1991 BX 17 TZD Estate
1991 BX 17 TZD Estate
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Post by mat_fenwick »

I'll be giving it a go tonight, so hopefully not another late one! If I remain in a good mood I'll take some photos. I understand the original clutch cables are easier to get back on, and AFAIK mine hasn't been changed - nothing in the service history and I certainly haven't done it.

Mick, from memory if you take up the carpet in the driver's footwell there is a grove in the floorpan which then passes underneath the front seat crossmember. Not sure of the best route from then on though.
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
Post Reply