hoses
-
- Confirmed BX'er
- Posts: 34
- Joined: Thu Oct 14, 2010 9:35 am
- Location: Cumbria
hoses
Can anyone tell me where I can obtain hoses from? The hose from the water pump around the engine block needs replacing. I have fixed a repair which is working at present but it seems difficult to get so ordinary a part!
Philbrook
Re: hoses
Ebay may be a good bet but that will involve a lot of searching and chance.
I got hold of a brand new bottom hose on it for an n/a diesel last year, very glad to get it.
Most pipes are now not available, some still may be so at a main stealer but you will need the part no. If you let the forum know what type of Bx you have, hopefull Malcolm[Citronut] will be able to give you the part no. Oh, and BX pipes are not 'ordinary' any more.
Andy
I got hold of a brand new bottom hose on it for an n/a diesel last year, very glad to get it.
Most pipes are now not available, some still may be so at a main stealer but you will need the part no. If you let the forum know what type of Bx you have, hopefull Malcolm[Citronut] will be able to give you the part no. Oh, and BX pipes are not 'ordinary' any more.
Andy
- citsncycles
- Over 2k
- Posts: 3224
- Joined: Sun Aug 08, 2010 9:14 pm
- Location: Dursley, Gloucestershire
Re: hoses
When I was sourcing hoses for Timex last year (early 19 diesel), the only parts available from Citroen were the 2 main radiator hoses and a blanking cap for the manifold on the back of the block by the water pump. There was a few more bits available for later models but not much!
There are silicone hose kits available for valvers, but I don't know what may be interchangeable from that. I ended up replacing some hoses with silicone ones, and may eventually have to do them all that way. If your hose is the same pattern as mine you should be able to make something up with standard bends, straights and joiners - have a look at the Merlin Motorsport website for ideas.
There are silicone hose kits available for valvers, but I don't know what may be interchangeable from that. I ended up replacing some hoses with silicone ones, and may eventually have to do them all that way. If your hose is the same pattern as mine you should be able to make something up with standard bends, straights and joiners - have a look at the Merlin Motorsport website for ideas.
Mike Sims
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
- citsncycles
- Over 2k
- Posts: 3224
- Joined: Sun Aug 08, 2010 9:14 pm
- Location: Dursley, Gloucestershire
Re: hoses
I've just had a thought - a mate of mine used to get batches of hoses made up for H vans by a bloke in the Forest of Dean - I'll see if he's still going as he was prepared to make small batches at a reasonable price (ie less than Citroen).
Mike Sims
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
-
- Confirmed BX'er
- Posts: 34
- Joined: Thu Oct 14, 2010 9:35 am
- Location: Cumbria
Re: hoses
Many thanks for ideas- silicone looks like it might be the best bet for the long term.
Philbrook
-
- 1K Away
- Posts: 1767
- Joined: Mon Apr 12, 2010 8:46 pm
- Location: Normandy
- My Cars: It's all in my signature
- x 4
Re: hoses
What model is it? I've just bought new bottom hoses and one of the oil filter cooler hoses for the TZDs, still available from Citroen. The other oil cooler hose and the top hose aren't available though.
Mike - I'd be interested to hear what this hose bloke would say.
Mike - I'd be interested to hear what this hose bloke would say.
1990 BX TZD Estate ('the grey one', 1991 BX TZD Estate ('the white one'), 1982 2CV6 Charleston (in bits), 1972 AZU Serie B (2CV van), 1974 HY72 Camper, 1990 Land Rover 110 diesel LWB, 1957 Mobylette AV76, 1992 Ducati 400SS, 1966 VW Beetle, 1990 Mazda MX-5, 1996 Peugeot 106D, 1974 JCB 2D MkII, 1997 BMW R1100RS, 1987 Suzuki GSX-R1100, 1978 Honda CX500A, 1965 Motobecane Cady, 1988 Honda Bros/Africa Twin, 1963 Massey Ferguson 825, and a lot of bicycles!