Was Dollywobbler's 1988 19RD estate

Tell us about life with your BX, or indeed life in general!
User avatar
Philip Chidlow
Over 2k
Posts: 11594
Joined: Fri Oct 07, 2005 1:08 pm
Location: Chelmsford, Essex
x 25

Re: Dollywobbler's 1988 19RD estate

Post by Philip Chidlow »

I'll check re: Tanfield. Although it'll be a Google search - I've got no special information! :) nice BX Ian by the way... Liking the grey over grey with some grey thrown in for good measure...


Sent from my iPhone using Tapatalk
• 1992 Citroen BX TZD Turbo Hurricane
• 2006 Xsara Picasso 1.6 16v
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: Dollywobbler's 1988 19RD estate

Post by Dollywobbler »

It's blue! Starting to pack her now - I've got over 500 miles to cover in two days. Wish me luck!
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: Dollywobbler's 1988 19RD estate

Post by Dollywobbler »

250 miles in, and I'm loving it. Will be glad to get the other engine mount changed though! Not an issue on the motorway, where it sailed along at 70-ish very merrily indeed. It's a happy return to non-turbo motoring.
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: Dollywobbler's 1988 19RD estate

Post by Dollywobbler »

Back home now. 600 miles in two days with no bother at all. Seems to have kept most of its various fluids intact.

Steering is a bit vague around the dead-ahead though. I suspect some play where there shouldn't be any, but the steering column top bush is badly worn, which makes it feel worse. There's a good mm or two of movement. What can I do to fix this?
User avatar
citsncycles
Over 2k
Posts: 3224
Joined: Sun Aug 08, 2010 9:14 pm
Location: Dursley, Gloucestershire

Re: Dollywobbler's 1988 19RD estate

Post by citsncycles »

Check he rack mounting bolts are tight - I've known them to work loose if it's been curbed.
Mike Sims
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: Dollywobbler's 1988 19RD estate

Post by Dollywobbler »

Not very easy to check. Worringly, it seems the lost movement when I waggle the wheel is somewhere in the rack itself. The rack doesn't move. Also, it's the bearing at the top of the steering wheel which seems badly worn. Ugh!
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Re: Dollywobbler's 1988 19RD estate

Post by mat_fenwick »

What about the rubber coupling? It's one part I've never had to replace, but seems like it could fit your symptoms. I think there are two types - one for PAS and none-PAS cars. Chevronics did get some re-manufactured last year I think, but not sure if both types.
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: Dollywobbler's 1988 19RD estate

Post by Dollywobbler »

Maybe. When I wiggle the nearside wheel at six/nine o'clock, there's a distinct knocking noise. I loose sight of the movement after it goes into the rack.

On the other issue, has anyone replaced the bearing at the top of the steering column?
User avatar
Way2go
Over 2k
Posts: 7279
Joined: Fri Jan 13, 2006 3:15 pm
Location: RCoBerkshire
x 2

Re: Dollywobbler's 1988 19RD estate

Post by Way2go »

Dollywobbler wrote:Maybe. When I wiggle the nearside wheel at six/nine o'clock, there's a distinct knocking noise. I loose sight of the movement after it goes into the rack.

On the other issue, has anyone replaced the bearing at the top of the steering column?
Are you sure the top bearing is worn and its not just the usual case of the bottom bush has slid down the column above the UJ creating that illusion? If so manouevre the bush back up into place and fit a ty-rap on the active column directly below to keep it in place.

Mat is likely right on the Hardy disk diagnosis as they do split and cause play. You don't want that to fail completely :shock: so checking out earlier rather than later is essential.
1991 BX19GTi Auto
User avatar
citsncycles
Over 2k
Posts: 3224
Joined: Sun Aug 08, 2010 9:14 pm
Location: Dursley, Gloucestershire

Re: Dollywobbler's 1988 19RD estate

Post by citsncycles »

With regard to the rack play, pull the gaiter back and check the inner track rod joint - they were both worn on Timex. It'll be worth checking both sides, plus the pinion valve as if it's all worn it may be cheaper to buy a recon rack - last I checked they were around the £100 mark.
Mike Sims
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: Dollywobbler's 1988 19RD estate

Post by Dollywobbler »

Thanks chaps. Plenty to check! Shame the weather forecast here is grim for the next two days.

EDIT - dug out a torch and checked the steering column lower bush. No change. The movement in the top end is perpendicular to the column, not up and down along the length of it, which I had on another BX. ie, it seems to be wear in the bearing.

Alas my torch was unable to shine light upon the pinion, so that'll have to wait.
User avatar
Tim Leech
Over 2k
Posts: 15565
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 141

Re: Dollywobbler's 1988 19RD estate

Post by Tim Leech »

Sometimes the top bush in the column makes it way up the column allowing movement, the 16TRS did this, I took the wheel off and knocked it back down again and hey presto.
Lots of Motors, mostly semi broken....
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: Dollywobbler's 1988 19RD estate

Post by Dollywobbler »

Might be worth a try. Not got the car on the driveway at the moment though, as it has temporarily been replaced with a VW Crafter minibus.

I did get a chance earlier to get the BX on a ramp and get a second-opinion on the play. Does indeed look like the rack, though the rubber coupling at least looks sound.
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: Dollywobbler's 1988 19RD estate

Post by Dollywobbler »

Nope. That didn't do anything to help. Still got play. So, new steering column, new steering rack and a new clutch and it'll be lovely!
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: Dollywobbler's 1988 19RD estate

Post by Dollywobbler »

Problems aside, I have to say that this BX is rather lovely to drive. I'm staggered at how more compliant the suspension feels than the two TDs I owned previously, and how little I'm missing that turbocharger. Yes, a little more performance would be nice at times, but actually, I'll sacrifice it for the uncluttered engine bay and ease of driving. There's no waiting for the turbo to spool up, or struggling to keep it on boost and the shorter gearing is a massive boon around here - I can drive the 12 miles of twisty road from town to home almost all the way in fifth gear. That certainly wasn't the case with the TD, as I was always having to downshift to keep the turbo spinning.

Not that the news is all good. I removed the side trims either side of the rear seat yesterday (well, the nearside one) and found some rot on the inside of the sill. Keeping this BX solid is going to be a major challenge and this factor could be the one reason I sell up later in the year.
Post Reply