drivers door card removal.
- greendale65
- BXpert
- Posts: 509
- Joined: Sun Mar 02, 2014 5:52 pm
- x 20
drivers door card removal.
Ok you bx's. My next job is to remove door card to replace electric
window motor anyone done this job tell me its easy.
( I have know fitted my centre arm rest. )
window motor anyone done this job tell me its easy.
( I have know fitted my centre arm rest. )
Re: drivers door card removal.
There are 3 screws that hold the armrest on, should be crossheads.
Unscrew the doorpin.
Gently pull the doorcard off around its perimeter, being carefull that the trim clips dont rip out of the doorcard or break.
Mike P
Unscrew the doorpin.
Gently pull the doorcard off around its perimeter, being carefull that the trim clips dont rip out of the doorcard or break.
Mike P
Last edited by Mike P on Sat Mar 29, 2014 7:35 pm, edited 1 time in total.
"F" White Phase 1 16V: 62K miles & seen on TV
"E" Grey Phase 1 16V: Long term project in bits
"E" Grey Phase 1 16V: Long term project in bits
Re: drivers door card removal.
Tip of the day to :gently" remove the door card use a tyre lever or some over large surface area longish lever to gently prise the clips of. Otherwise you will bugger the card up.
1991 BX19 TZS 04/01/91 (Deceased)
1990 BX19 TRS 27/10/89 (Reborn)
1992 BX19 TXD (Ex UK - K 744 SDF) 15/06/92
1990 BX19 TZS Auto 06/11/1989
1992 BX TZD Turbo Estate (Ex UK) 1/07/91
1990 BX19 TRS 27/10/89 (Reborn)
1992 BX19 TXD (Ex UK - K 744 SDF) 15/06/92
1990 BX19 TZS Auto 06/11/1989
1992 BX TZD Turbo Estate (Ex UK) 1/07/91
Re: drivers door card removal.
I bought a trim clip tool especially for this job, as the cardboard doorcards can get fragile with age, especially if they have been off before or got damp.
It's always nice to take the doorcard off and see that the plastic membrane is still intact behind it.
Mike P
It's always nice to take the doorcard off and see that the plastic membrane is still intact behind it.
Mike P
"F" White Phase 1 16V: 62K miles & seen on TV
"E" Grey Phase 1 16V: Long term project in bits
"E" Grey Phase 1 16V: Long term project in bits
Re: drivers door card removal.
Don't forget the screws on the door speaker. The speaker grille simply unclips using a small flat headed screwdriver.
Mark Smith
Is it just me or is everything shit?
1989 BX GTi 16 valve. Blanc Alpine. Completed the Citroen Classic Challenge Ecosse and 1337 miles without a hitch.
2000 XM VSX 2.1 td Auto. Rouge Magenta.
TGD saloon many years ago.
1990 Swift 'Corniche' 12/2 aka BXClub HQ.
Honda Firestorm. Gone, but not forgotten.
2015 Triumph Tiger Explorer XC.
Is it just me or is everything shit?
1989 BX GTi 16 valve. Blanc Alpine. Completed the Citroen Classic Challenge Ecosse and 1337 miles without a hitch.
2000 XM VSX 2.1 td Auto. Rouge Magenta.
TGD saloon many years ago.
1990 Swift 'Corniche' 12/2 aka BXClub HQ.
Honda Firestorm. Gone, but not forgotten.
2015 Triumph Tiger Explorer XC.
-
- Over 2k
- Posts: 3940
- Joined: Sun Dec 04, 2005 2:25 pm
- Location: Wales
- Contact:
Re: drivers door card removal.
I find electricians pliers are excellent for trim clips. Believe me, the trim clips and cardboard on a BX are a lot better than what you get on a Land Rover Discovery! As said above, three screws for the arm rest, but two behind the speaker grille, and one below the mirror. Once you've freed the trim clips, you need to lift the card up to unhook it from the window frame. Then you'll need to disconnect the wiring plugs for window/central locking and speaker.
I've never had to change just the motor. Can it be done in situ or have you got to go to the arseache of removing the whole mechanism? For the OP's sake, I hope it's the former!
I've never had to change just the motor. Can it be done in situ or have you got to go to the arseache of removing the whole mechanism? For the OP's sake, I hope it's the former!
- Tim Leech
- Over 2k
- Posts: 15579
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 150
Re: drivers door card removal.
Haynes manual actually gives a good description of this...
Lots of Motors, mostly semi broken....
- citsncycles
- Over 2k
- Posts: 3224
- Joined: Sun Aug 08, 2010 9:14 pm
- Location: Dursley, Gloucestershire
Re: drivers door card removal.
1 small addition to this, the arm rest screws on some later cars are Torx head as opposed to cross head. In fact if you're working on a Mk2 I'd say that a decent Torx set is essential.
Mike Sims
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
Re: drivers door card removal.
I noticed the difference whilst working on Paul's TGD last year. All the screws on my 1989 valver are cross head, but on Paul's later TGD they're Torx.
Mark Smith
Is it just me or is everything shit?
1989 BX GTi 16 valve. Blanc Alpine. Completed the Citroen Classic Challenge Ecosse and 1337 miles without a hitch.
2000 XM VSX 2.1 td Auto. Rouge Magenta.
TGD saloon many years ago.
1990 Swift 'Corniche' 12/2 aka BXClub HQ.
Honda Firestorm. Gone, but not forgotten.
2015 Triumph Tiger Explorer XC.
Is it just me or is everything shit?
1989 BX GTi 16 valve. Blanc Alpine. Completed the Citroen Classic Challenge Ecosse and 1337 miles without a hitch.
2000 XM VSX 2.1 td Auto. Rouge Magenta.
TGD saloon many years ago.
1990 Swift 'Corniche' 12/2 aka BXClub HQ.
Honda Firestorm. Gone, but not forgotten.
2015 Triumph Tiger Explorer XC.
-
- Over 2k
- Posts: 3940
- Joined: Sun Dec 04, 2005 2:25 pm
- Location: Wales
- Contact:
Re: drivers door card removal.
My 1988 RD is still on screws. 1991 TGD was Torx.
-
- Over 2k
- Posts: 5917
- Joined: Wed Dec 16, 2009 8:02 pm
- Location: Harwood, Bolton
- My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air. - x 27
Re: drivers door card removal.
once the door card is prized away around the sides and bottom edges you need to raise it upwards to release it from the door mirror clip which it hooks over and will break off if you just try to prize it outwards.
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.