BX Gti 4x4 build.

A place for us to show off our cars in all their glory. Please keep picture sizes to about 800x600 pixels.
Rc00047
Confirmed BX'er
Posts: 32
Joined: Fri Apr 11, 2014 9:05 am
Location: Norway
x 1

Re: BX Gti 4x4 build.

Post by Rc00047 »

Have been couple off slow weeks now. Haven't done so much but here some new stuffs.


Finally got the rear sylinders assambled.

Image

Image

Image

Image



Began slowly dissamble the spare rear axle i had becouse I needed some parts that where destroyed at dissamble. Rust and rust.

Image

Started assambly of the rear axle arm bearings, didn't came far... The new bearings and seal where to little. Apparently the fwd bx and 4x4 uses different rear bearings.
If someone know where to by a 4x4 rear arm bearing kit shout out. Need also a way to make new hydralic lines that goes from the spheres to the sylider.
Is it possible to buy some tool to make them? And buy new nipples and those small seals that inside?

Image

Image

Image

Had to modify the plastic dust cover. That sit inside the arm. Didn't fit so made to fit, It had some cracks in the plastic so needed to seal it with tape.

Image

Sits like a charm :)

Image
Red Gti 87.
User avatar
Way2go
Over 2k
Posts: 7279
Joined: Fri Jan 13, 2006 3:15 pm
Location: RCoBerkshire
x 2

Re: BX Gti 4x4 build.

Post by Way2go »

I don't wish to rain on your parade but is the use of that adhesive tape a good idea? If the tube is cracked does that not run the risk of the oil and adhesive mixing and coagulating in the bearings? :?
1991 BX19GTi Auto
Rc00047
Confirmed BX'er
Posts: 32
Joined: Fri Apr 11, 2014 9:05 am
Location: Norway
x 1

Re: BX Gti 4x4 build.

Post by Rc00047 »

Theres no oil in the arm just bearing grease. The tube is only there to protect the bearing from dust and dirt.
Red Gti 87.
Mothman

Re: BX Gti 4x4 build.

Post by Mothman »

Surely its not meant to be wrapped in tape? Hope it works.
Rc00047
Confirmed BX'er
Posts: 32
Joined: Fri Apr 11, 2014 9:05 am
Location: Norway
x 1

Re: BX Gti 4x4 build.

Post by Rc00047 »

Need take it apart as i found out that the bearingkit that i bought dosent fitt 4x4 only fwd... Does someone know where
To buy 4x4 bearings for the swingarm? Cant find any on ebay tough..
Red Gti 87.
Kaapelimies
BXpert
Posts: 289
Joined: Wed Feb 10, 2010 9:01 am
Location: Hollola, Finland
x 16

Re: BX Gti 4x4 build.

Post by Kaapelimies »

If nothing else found, Sitronen Oy (a Finnish company) probably has these, or know what you must ask from a dealer. As I recall they were a mix of XM and some other model bearings if originals are not found. The outer sealings can be a pain to find?
BX 4x4 estate, several BX Van's and some more normal estates in Finland.
Rc00047
Confirmed BX'er
Posts: 32
Joined: Fri Apr 11, 2014 9:05 am
Location: Norway
x 1

Re: BX Gti 4x4 build.

Post by Rc00047 »

Got time to designe new wheelhub carrier. I destroyed the other, so making two new so they are alike.

Image
Red Gti 87.
User avatar
barry badger
BXpert
Posts: 341
Joined: Sun Feb 12, 2012 10:17 am
Location: north west.
x 7

Re: BX Gti 4x4 build.

Post by barry badger »

When i did one of the arms on mine 4 years ago i bought 2 spare sets for the future.
The bearing part numbers are 26 207 049 and the bearing make is timken, outer race lm12711, inner race lm12749 097 08.
seal part number is 5133.21.
the standard plastic tube fits if i can remember correctly with large 'o' rings to make it fit snugly in the arm.
I think some of the parts are shared with the xantia and c15.
good luck with locating them
1993 tzd estate, on sorn
1992 tzd estate, slowly being raided for parts
1992 txd estate, "doom blue" on the road
1991 4x4 estate, on sorn
Rc00047
Confirmed BX'er
Posts: 32
Joined: Fri Apr 11, 2014 9:05 am
Location: Norway
x 1

Re: BX Gti 4x4 build.

Post by Rc00047 »

Thanks for the heads up. Checked them they where to smal. Have found all the other bearings and such. only thing im missing is the seal. But is there a special name for the seal?
Sins theres somewhat of "two" seals on it? Sins the flange are sealing on the outside and inside.
Red Gti 87.
User avatar
Djr88
Confirmed BX'er
Posts: 50
Joined: Sat Nov 19, 2011 12:47 am
Location: Caerphilly, South Wales.
My Cars: 96' Frontera A 2.8 tdi sport swb
93' BX TZD cooked!! :(
03' LT35 TDI camper
x 1

Re: BX Gti 4x4 build.

Post by Djr88 »

LOOKING GOOD!
93' BX TZD TURBO red
Rc00047
Confirmed BX'er
Posts: 32
Joined: Fri Apr 11, 2014 9:05 am
Location: Norway
x 1

Re: BX Gti 4x4 build.

Post by Rc00047 »

Hello. Been a while since i've posted here.

Didn't get so far with the build due to personal things that needed to get sorted out first. And all other projects :mrgreen:

Was on holiday with the car ca a year ago. All went well, to the point where we where travlig home.

Had just installed bigger and stronger clutch kit. So the clutch didn't slipp on acceleration.

Where travling home when we came to a light stop. And i decided to "launch" it on green.

Bom it said. And the diff exploded into de new clutch. :cry:
Got it towed home.

Savage a spare transmission. Mounted it and still car had problems with realising the clutch. Pressureplate was fucked preaty bad [emoji38]

And I just stoved the car away.
Until now when i have removed the diesel engine. One broken mount thats goes over the timing belt, just mm befor it snapped the belt [emoji38]

Have slowly began to assambly it again now with "new" gti engine.

Some little more power and improvments 8)

Here some pictures. Can take some more tomorrow.

Image

Image

Image

Image

Image

Image

Sent from my Moto G (4) using Tapatalk
Red Gti 87.
Defender110
Over 2k
Posts: 5917
Joined: Wed Dec 16, 2009 8:02 pm
Location: Harwood, Bolton
My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air.
x 27

Re: BX Gti 4x4 build.

Post by Defender110 »

Wow, you've got your work cut out there. great commitment well done.
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
Rc00047
Confirmed BX'er
Posts: 32
Joined: Fri Apr 11, 2014 9:05 am
Location: Norway
x 1

Re: RE: Re: BX Gti 4x4 build.

Post by Rc00047 »

Defender110 wrote:Wow, you've got your work cut out there. great commitment well done.
Thanks. Still alot of work left[emoji1]

Sent from my Moto G (4) using Tapatalk
Red Gti 87.
User avatar
TizzyD
BXpert
Posts: 537
Joined: Fri Jun 01, 2012 10:36 pm
Location: Bedfordshire
x 10

Re: BX Gti 4x4 build.

Post by TizzyD »

Loving those wheels :) Are they 14s or 15s ? and how wide are they ?
'02 Clio Dynamique 1.2 16v - 92K - Sold
'09 Yamaha YBR 125 - 1100 miles
'93 Bx 17 TZD Turbo - 240K - The Aubergine

Image
Rc00047
Confirmed BX'er
Posts: 32
Joined: Fri Apr 11, 2014 9:05 am
Location: Norway
x 1

Re: RE: Re: BX Gti 4x4 build.

Post by Rc00047 »

TizzyD wrote:Loving those wheels :) Are they 14s or 15s ? and how wide are they ?
Hey. They are 15x7 if i remember correctly. Original bmw wheels that i redrilled and custom 10mm spacers.

Sent from my Moto G (4) using Tapatalk
Red Gti 87.
Post Reply