Wiper motor re-set
-
- Over 2k
- Posts: 2695
- Joined: Sun Sep 02, 2012 9:54 pm
- Location: South Lincs
- My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k - x 137
Wiper motor re-set
How to change the wiper so it stops/starts from the driver side?
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Re: Wiper motor re-set
Hard to explain but you undo the nut on the linkage to the motor. You then move the wiper and the linkage will rotate on the motor without gripping it. Change the position and do the nut up. Can't think why you'd want to though!
Thinking about it, that was for an AX. No guarantee the BX will be the same, but can't imagine it being massively different.
Thinking about it, that was for an AX. No guarantee the BX will be the same, but can't imagine it being massively different.
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
Re: Wiper motor re-set
as Kitch says
basically you move the short link that is attached directly to the motor spindle and point it the opposite direction,
cant remember which way it normaly points,
but say it points horizontal and to the left, you need to move it horizontal and to the right, if you understand what i mean,
either direction if it aint quite at the horizontal the wiper will go past park and back a bit off park,
then on switching them on they will go the wrong direction slightly before heading across the screen
regards malcolm
basically you move the short link that is attached directly to the motor spindle and point it the opposite direction,
cant remember which way it normaly points,
but say it points horizontal and to the left, you need to move it horizontal and to the right, if you understand what i mean,
either direction if it aint quite at the horizontal the wiper will go past park and back a bit off park,
then on switching them on they will go the wrong direction slightly before heading across the screen
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)