Find your loose screw

BX Tech talk
Post Reply
Gareth Wales
BXpert
Posts: 267
Joined: Wed Jun 01, 2005 7:12 pm
Location: Snowdonia

Find your loose screw

Post by Gareth Wales »

Dropped a tiny screw in the dust?
Find it by dropping another (and of course watching where it bounces).
The brain takes a snapshot of what you've looking for, and enables you to identify the missing one.
Its called cognitive recognition - honest.
And hey - the worst that can happen is that you loose all your screws.
Brian
BXpert
Posts: 441
Joined: Sun Jan 08, 2006 5:53 pm
Location: Bedfordshire UK

Post by Brian »

HI Gareth,

Done this trick many times, does not always work though.

But to the rescue comes my very strong magnet
"saved from an old audio speaker", and that works,
providing the offending screw/bolt/nut/washer
is actually on the ground, and not brass or good quality stainless steel.
tim leech

Post by tim leech »

I have abox of screws and odds and ends in my garage, which i rob if i loose one, then make it fit! :twisted:
User avatar
Cornishbx16v
BXpert
Posts: 403
Joined: Wed Oct 05, 2005 3:41 pm
Location: Cornwall
Contact:

Post by Cornishbx16v »

i use my magnetic bits tray if i drop anyhting! jusst pass the tray over the area and hte screws mormally pop up! althoguh when i dropped the box of spares for the r/c truck it didnt work as most were either alliminium or titainium screws!
Timmo.

After all I AM CORNISH!!!!

www.bx16v.com
www.bx16v.co.uk/forum
www.bx16valve.co.uk
Mr B
Northern Moderator
Northern Moderator
Posts: 710
Joined: Mon May 16, 2005 12:32 pm
Location: On a sofa, up the road from Marty!

Post by Mr B »

Does it work with screwdrivers, ratchets, sockets, hammers, lead lamps toolbox, BX................ :roll:
1991 Landrover Discovery
1995 VW Golf SE
User avatar
DLM
Our Trim Guru
Posts: 1620
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: Historically, lots of BX hatches/estates in the 90s/00s - 16/19i/17td/19d
Recent scruffy diesel n/a estate - "The Red Shed" - is no longer mine.
x 9

Post by DLM »

Not much good if you drop a BX bonnet....but then other methods of detection might be simpler.

I have a large collection of BX screws.
Back on two wheels and pedal power for the moment.
Brian
BXpert
Posts: 441
Joined: Sun Jan 08, 2006 5:53 pm
Location: Bedfordshire UK

Post by Brian »

It works on the steel ones !!!
User avatar
Oscar
1K Away
Posts: 1091
Joined: Wed May 18, 2005 5:07 pm
Location: Driving a ZX

Post by Oscar »

More than one loose screw on this forum though...
(Red BX 1.7TZD ("Well, it is a style icon" - Tom Sheppard)) "Was", Tom, "was"
User avatar
DLM
Our Trim Guru
Posts: 1620
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: Historically, lots of BX hatches/estates in the 90s/00s - 16/19i/17td/19d
Recent scruffy diesel n/a estate - "The Red Shed" - is no longer mine.
x 9

Post by DLM »

Last Saturday I found myself pulling plenty of BX screws with a magnetic jobby out of the subframe "wells" in the boot of my BX (they don't have the covers after Jon and I had to drop the subframe slightly to get a welding job done ).

I have plenty of screws loose, but most in the boot of my BX at the moment......
Back on two wheels and pedal power for the moment.
Mr B
Northern Moderator
Northern Moderator
Posts: 710
Joined: Mon May 16, 2005 12:32 pm
Location: On a sofa, up the road from Marty!

Post by Mr B »

I know of a loose screw in front of my steering wheel........
1991 Landrover Discovery
1995 VW Golf SE
Brian
BXpert
Posts: 441
Joined: Sun Jan 08, 2006 5:53 pm
Location: Bedfordshire UK

Post by Brian »

If the loose screw is in front of the steering wheel, it's quite likely in the engine compartment,--- magnet required...
Post Reply