Hi,
some of my pipes have recently burst. I think about the exchange. Has anyone ever employed one of these? I need 16 valves!
https://www.bakerbm.com/bx16v-silicone- ... s-kit.html
https://www.redox-silicone-hoses.com/bx ... color,noir
Where can you get it cheaper?
Thank you very much
Bx silicone water pipes
-
- New Member
- Posts: 2
- Joined: Mon Jan 28, 2019 3:32 pm
- Location: Balatonalmádi
- My Cars: 1, Cx Break
2, Cx Prestige,
3, Bx 1.8 Tzd Automatic,
4, Bx 16 Valve
5, Fiat 850 Sport
-
- Over 2k
- Posts: 11594
- Joined: Fri Oct 07, 2005 1:08 pm
- Location: Chelmsford, Essex
- x 25
Re: Bx silicone water pipes
I checked out Redox for a set for my TZD Turbo. It's a far more complete collection than others I've seen and, to be honest although it's a lot of money it is I think the only option as I haven't found sets like that elsewhere. You can get partial sets from China (as well as rads too) but not as far as I'm aware for 16vs.
• 1992 Citroen BX TZD Turbo Hurricane
• 2006 Xsara Picasso 1.6 16v
• 2006 Xsara Picasso 1.6 16v
-
- Merseyside resident
- Posts: 3587
- Joined: Tue May 17, 2005 11:48 pm
- Location: BXProject
- My Cars: BX 16v Ph2 - Jazz
BX 16v Ph2 - XPO - x 85
Re: Bx silicone water pipes
I helped Baker's getting the 16v set made up, it's really for the Phase2 16v with the larger pipe connection to the coolant manifold on the back of the engine.
I have one of their first sets, still looking good. My only criticism/concern is that they aren't logged so you do get a small amount of seepage through the ends. I found decent Jubilee brand hose clamps helped this.
The bleed pipe that runs across the top of the read is 3 times the original dimension so doesn't clip in to the clip in the cooling pack to plate.
For me they've been worth every penny.
I have one of their first sets, still looking good. My only criticism/concern is that they aren't logged so you do get a small amount of seepage through the ends. I found decent Jubilee brand hose clamps helped this.
The bleed pipe that runs across the top of the read is 3 times the original dimension so doesn't clip in to the clip in the cooling pack to plate.
For me they've been worth every penny.