Heater control panel illumination

BX Tech talk
Post Reply
User avatar
white exec
BXpert
Posts: 681
Joined: Sat Sep 12, 2020 4:04 pm
Location: Sayalonga, Malaga
My Cars: 1992 BX19D Millesime
- LHD, NA, AC, RP_5800
1996 XM 2.5TD Exclusive
x 70

Heater control panel illumination

Post by white exec »

For a Mk2, am I right in thinking that access to the bulbs is by removing the control knobs?
I've tried pulling them off - even with some padded pliers - but they all seem solidly attached.
Any advice appreciated.
Chris
User avatar
Dave_16v
BXpert
Posts: 193
Joined: Fri Aug 25, 2017 10:20 pm
Location: Yorkshire
My Cars: BX 16 Valve Ph 2 Current
BX 16 valve Ph 1 past
BX Gti past
BX Gti Auto past
ZX Volcane keeping others going
x 49

Re: Heater control panel illumination

Post by Dave_16v »

If they are like this they pull off but they can be firm.

Image
Pic already on the site, for copyright etc.
Prefer it to the Lamborghini, like Signor Gandini!
User avatar
white exec
BXpert
Posts: 681
Joined: Sat Sep 12, 2020 4:04 pm
Location: Sayalonga, Malaga
My Cars: 1992 BX19D Millesime
- LHD, NA, AC, RP_5800
1996 XM 2.5TD Exclusive
x 70

Re: Heater control panel illumination

Post by white exec »

Thanks, Dave - will have another go.
Chris
User avatar
Tim Leech
Over 2k
Posts: 15565
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 141

Re: Heater control panel illumination

Post by Tim Leech »

Try using your hands first, but you may indeed need pliers and a cloth

You then need to remove the vents, and prize the clips out too, its fiddly but not difficult

Plenty of how tos on here
Lots of Motors, mostly semi broken....
User avatar
white exec
BXpert
Posts: 681
Joined: Sat Sep 12, 2020 4:04 pm
Location: Sayalonga, Malaga
My Cars: 1992 BX19D Millesime
- LHD, NA, AC, RP_5800
1996 XM 2.5TD Exclusive
x 70

Re: Heater control panel illumination

Post by white exec »

Thanks, Tim. I did find the earlier post (about blower control), with its helpful photos and tips.
Chris
User avatar
white exec
BXpert
Posts: 681
Joined: Sat Sep 12, 2020 4:04 pm
Location: Sayalonga, Malaga
My Cars: 1992 BX19D Millesime
- LHD, NA, AC, RP_5800
1996 XM 2.5TD Exclusive
x 70

Re: Heater control panel illumination

Post by white exec »

Success. Piece of gaffer-tape on the knobs to protect them, and a sharp tug with the pliers.
Some very dry spring clips in the knobs, likely never disturbed. Have silicone greased each one.
Both bulbs blown, and replaced.
Some lubricating contact cleaner for the fan track.
Looking forward to being able to see the controls at night! :roll:
Chris
Post Reply