Xud7 te to xud9 te

[Xm25td]

Hi all,
I have tzd bx with xud7te engine, cambelt skipped camshaft and cam caps broke off so i need new head, i have a cheap engine oportunity but its a xud9 te, i has a different intake on it and injection pump has some wires on it i think its for timing advance and there is vacuum pump on camshaft end instead of hydraulic pump pulley. Engine doesnt come with injection pump!
What i was thinking is heads look the same so i can swap my intake manifold, i can remove vacuum pump and install hydraulic pulley? And last most importat is can i swap my bosch injection pump and injectors from xud7te to xud9te??

[Xm25td]

Engines

[rutter123]

You will need a bx camshaft as it has the spigot for the pulley.
Sourcing a XUD7TE head shouldn't be too difficult.

[Xm25td]

Damn so no way of installing a pulley on xud 9?

[Xm25td]

But i have a xud9 n/a camshaft at home and pulley fits same as in xud7te so why is there any difference on xud9 te?

[rutter123]

Not sure on that, but if you can source an xud9 bx 1.9n/a camshaft you can use it on an XUD7TE head, it just makes it more torquey at lower rpm's but a little flatter top end, the pulleys are the same for all diesels and are interchangeable, petrol engine pulleys are smaller.
Dependent on the damage to your head/caps you may just get away with a cam swap.
Not quite that simple but you get the picture.