Looking for parts!!!!!

Paris · Post by **Paris** » Thu Oct 06, 2005 5:02 pm

right i am finding it really hard to find an exaust for my bx any answers?

its a 1.4

and a white bonnet

Grace · Post by **Grace** » Thu Oct 06, 2005 6:19 pm

Check the for sale/wanted area.

M · Post by M » Thu Oct 06, 2005 8:03 pm

Any autofactor worth his salt should be able to source you one. You can check factors like GSF (www.gsfcarparts.com) and have a look on line - but any branch of National etc will be able to get you one in to fit - they aint obsolete.

Otherwise break out the coke cans, jubilee clips and gun gum....

cavmad · Post by **cavmad** » Thu Oct 06, 2005 8:24 pm

As regards the white bonnet Vanny may have one for you.

Stewart (oily!) · Post by **Stewart (oily!)** » Fri Oct 07, 2005 4:47 pm

There are at least two bonnet types, theres the "long nose" type or the "short Nose" GTIs and TZDs have the short nose ones which show off a little of the black grille .
Stewart

Kitch · Post by **Kitch** » Sat Oct 08, 2005 7:21 pm

I imagine he's after an A/M one to make some noise.

No such luck fella, they don't make one for the sleeve jointed 1400's. The flange jointed bigger diameter cars have a Sebring box available and I believe Scorpion and Devil also cater.

No good to you however. Only route is getting one made, and thats pricey.

Cornishbx16v · Post by **Cornishbx16v** » Sat Oct 08, 2005 8:20 pm

if it is a full system he is after as kitch mentioned then i would say look for a powerflow agent as they will make one to your spec! although it normally costs around £350 for a full system (stainless)