Couple of common bits needed

Buy or sell parts etc. Please put 'Wanted' in the title if it is a request for parts.
Post Reply
User avatar
Toddman
BXpert
Posts: 389
Joined: Sat Jul 02, 2005 12:55 am
Location: Lincolnshire
x 2
Contact:

Couple of common bits needed

Post by Toddman »

Looking for a few little finishing bits for my silver valver -

Rubber o type ignition barrel trim.
The 2 self gripping screw plates that slot onto the metalwork behind the top part of the steering column shroud that the 2 TX5 screws go into.
Lower gear level gaiter, holed is fine so long as it is whole and not badly gashed.

Thanks
Please call me Luke :)
1989 BX 16valve White 70k - G764KEW


http://www.bx16valve.com
User avatar
Tim Leech
Over 2k
Posts: 15565
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 141

Re: Couple of common bits needed

Post by Tim Leech »

I know Barry has these as he is breaking a couple of BX's!
Lots of Motors, mostly semi broken....
User avatar
Toddman
BXpert
Posts: 389
Joined: Sat Jul 02, 2005 12:55 am
Location: Lincolnshire
x 2
Contact:

Re: Couple of common bits needed

Post by Toddman »

Tim Leech wrote:I know Barry has these as he is breaking a couple of BX's!
Thanks Tim I need to go see him when he is all settled in but if anyone ha sthem and cna pop thme i the post even bette :D
Please call me Luke :)
1989 BX 16valve White 70k - G764KEW


http://www.bx16valve.com
Post Reply