drive shaft
drive shaft
Am looking for a nearside cv joint/drive shaft 90 teeth/splines ABS for turbo diesel, getting very urgent.
Alternatively can anybody recommend someone who rebuilds them.
Replaced rebuilt ones on a different car many years ago and they failed again within 5k miles.
Please no mention of hens teeth. I know!!!!!!!
Alternatively can anybody recommend someone who rebuilds them.
Replaced rebuilt ones on a different car many years ago and they failed again within 5k miles.
Please no mention of hens teeth. I know!!!!!!!
- ken newbold
- Over 2k
- Posts: 4408
- Joined: Sun Aug 14, 2005 10:53 pm
- x 5
Re: drive shaft
is it just the CV joint hub end you're looking for?
They think it's all over, it is now!
- JayW
- 1K Away
- Posts: 1590
- Joined: Thu Dec 07, 2006 6:40 pm
- Location: Now listen here you mullet...
- x 13
Re: drive shaft
Not rare at all, or expensive. Search J&R trading Driveshafts, always get all my shaft from them.
I have zero patience for your tedium.
Re: drive shaft
have you asked your local motor factors for a new CV joint ???,
regards malcolm
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
-
- Over 2k
- Posts: 2695
- Joined: Sun Sep 02, 2012 9:54 pm
- Location: South Lincs
- My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k - x 136
Re: drive shaft
Got mine for the t/d from a place in Birmingham, new off the shelf for £30 plus pp, will try to find the receipt, is the same as a gti being the slightly bigger diameter shafts. 40k's on still ok.
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
Re: drive shaft
Thanks for replies.
Before I asked, explored Citroen and motor factors and no joy.
Have heard of J and R in Birmingham and then read some very worrying feedback about their joints so thought I'd try here first and if all else fails will have to bite the bullet and go for remanufactured aftermarket ones.
It is the CV joint itself which is clonking, it may be easier to just buy the whole driveshaft with new joint, we did fill with new grease but of course they don't heal themselves.
Really's Mum
Before I asked, explored Citroen and motor factors and no joy.
Have heard of J and R in Birmingham and then read some very worrying feedback about their joints so thought I'd try here first and if all else fails will have to bite the bullet and go for remanufactured aftermarket ones.
It is the CV joint itself which is clonking, it may be easier to just buy the whole driveshaft with new joint, we did fill with new grease but of course they don't heal themselves.
Really's Mum
- ken newbold
- Over 2k
- Posts: 4408
- Joined: Sun Aug 14, 2005 10:53 pm
- x 5
Re: drive shaft
Can probably get you a good used one if you can hang on a couple of days
They think it's all over, it is now!
- JayW
- 1K Away
- Posts: 1590
- Joined: Thu Dec 07, 2006 6:40 pm
- Location: Now listen here you mullet...
- x 13
Re: drive shaft
I've had more than a dozen shafts from J&R over the past 5 years or so and of the cars I'm still in touch with, not one of them has had a problem.
I have zero patience for your tedium.
Re: drive shaft
Hi Ken have just seen your post, sorry, have been working away again for two weeks.
Do you still have a good used nearside driveshaft with the 90 splines for abs?
If you do please pm me.
Thanks
Do you still have a good used nearside driveshaft with the 90 splines for abs?
If you do please pm me.
Thanks
Re: drive shaft
Hi all, bit the bullet and bought a driveshaft from J&R, it arrived today.
WRONG ONE.
Having phoned them to explain they admitted finally that they do not do the one with 90 splines. Very good communication no problems dealing with them at all.
Back to square one again.
STILL LOOKING
WRONG ONE.
Having phoned them to explain they admitted finally that they do not do the one with 90 splines. Very good communication no problems dealing with them at all.
Back to square one again.
STILL LOOKING
- Jaba
- 1K Away
- Posts: 1893
- Joined: Tue Jul 05, 2005 7:54 am
- Location: Usually in the garage
- My Cars: BX GTi, C3 Auto
- x 80
Re: drive shaft
You can get 90 segment reluctor rings to convert standard CV joints. Saw them on ebay a while back from a german seller.
Also various French sites used to list ABS drive shafts. There is a couple showing on Oscaro for example and piecesavanue.
Link to pieces avenue : http://citroen.piecesavenue.com/bx-xb/1 ... ansmission
Oscaro I think are a bit cheaper but it depends on shipping of course : http://www.oscaro.com/cardan-citroen-bx ... 706-936-gt
Have you tried Edwards , BX breaker in Essex ??
Also various French sites used to list ABS drive shafts. There is a couple showing on Oscaro for example and piecesavanue.
Link to pieces avenue : http://citroen.piecesavenue.com/bx-xb/1 ... ansmission
Oscaro I think are a bit cheaper but it depends on shipping of course : http://www.oscaro.com/cardan-citroen-bx ... 706-936-gt
Have you tried Edwards , BX breaker in Essex ??
The Joy of BX with just one Citroën BX to my name now. Will I sing Bye Bye to my GTI or will it be Till death us do part.
- ken newbold
- Over 2k
- Posts: 4408
- Joined: Sun Aug 14, 2005 10:53 pm
- x 5
Re: drive shaft
I thought it was just the cv joint end that you need?
They think it's all over, it is now!
Re: drive shaft
yes it is the cv which is badly worn, drive shaft itself is ok
really's mum
really's mum
- ken newbold
- Over 2k
- Posts: 4408
- Joined: Sun Aug 14, 2005 10:53 pm
- x 5
Re: drive shaft
90 splines seems an aweful lot, an chance you could post a pic showing the shaft "end-on" ?
They think it's all over, it is now!
Re: drive shaft
90 splines is a lot but is normal for tzd turbo with abs, same I believe as gti.
Am in Brighton with the shafts on the car, using as a daily driver till I find the correct part and replace it.
Pics impossible at the moment but believe me it has 90.
Am in Brighton with the shafts on the car, using as a daily driver till I find the correct part and replace it.
Pics impossible at the moment but believe me it has 90.