Diesel leak...
by Philip Chidlow » Tue Aug 30, 2011 1:26 pm
First post
My TXD has decided it's going to start leaving a little patch of diesel when parked up. It's under the sump, fuel pump side. I can't see where it's...
Last post
Hi
Well, we have located the leak, and not been able to fix it. The leak's not bad - leaving a drip here or there, but it is a problem.
It's at...
26 Replies
1214 Views
Last post by Philip Chidlow Mon Sep 12, 2011 11:18 am
Waxoyl question
by KevR » Thu Sep 01, 2011 10:08 am
First post
I've just discovered a 10 litre tin of Waxoyl at the back of the shed. God knows how long it's been there. The solvent has all evaporated off,...
Last post
You can put the waxoyl on pretty much anywhere except brakes and exhaust.
In the end I heated up my solidified Waxoyl on a camping stove, then...
5 Replies
1131 Views
Last post by KevR Sun Sep 11, 2011 11:55 am
Cooling System
by kiwi » Sun Sep 11, 2011 12:16 am
First post
Just hope I can describe this well in writing.
BX19TZS
Got some strange things happening to the radiator water level.
Couple days ago when I got...
Last post
Try removing the thermostat and see if this helps if you havnt a spare one.
I had this happen to a BX years ago. The rad was under pressure even when...
3 Replies
252 Views
Last post by Mothman Sun Sep 11, 2011 7:59 am
Rear disc removal
by Wooscary » Mon Sep 05, 2011 1:21 pm
First post
Hello
I'm feeling like a little disc and pad change, but the rear discs don't have the same ordinary cross head screw holding them on, but rather...
Last post
Now then! Didn't get a chance tonight, oh well.
22 Replies
1140 Views
Last post by Wooscary Sat Sep 10, 2011 10:09 pm
strange driveshaft problem, now disappeared..
by andycadabra » Tue Sep 06, 2011 8:50 pm
First post
The other day, heavily loaded and on the motorway, I was getting a nasty pull to the left combined with a juddering through the steering wheel, for a...
Last post
Have you checked the state of the tyres.
Mine was pulling etc and I thought it was bushes which I changed.
Turned out to be a faulty tyre. Just...
7 Replies
421 Views
Last post by Discoil Sat Sep 10, 2011 3:05 pm
Bodywork - estate tailgate hinge
by Dollywobbler » Mon Aug 15, 2011 7:41 pm
First post
Howdy folks
Has anyone had to repair/have repaired an estate tailgate hinge? When my Mk1 got clobbered down the LH side, the car caught the tailgate...
Last post
Thanks Neil - sorry, missed this when you originally posted it.
The tricky bit is going to be sorting the twisted hinge out. My body repair bloke is...
6 Replies
512 Views
Last post by Dollywobbler Sat Sep 10, 2011 1:55 pm
Got a Turbo Diesel BX?
by Tim Leech » Tue Aug 30, 2011 2:10 pm
First post
Intercooler Cleaning
One thing that will help a Turbodiesel go really well is to steam clean the engine bay. Don't go mad with the pressure or...
Last post
Steam and alluminium?
Thin alloy at that, not a very wonderful idea! Pressure washer might be good though, at a reasonable distance, but cleaning...
7 Replies
724 Views
Last post by Vanny Sat Sep 10, 2011 12:56 am
Fog light wiring issues
by citsncycles » Tue Sep 06, 2011 8:57 pm
First post
BX failed the MOT today - but only on rear foglights, which my friend who helped check the lights on Sunday insists were working.
The light on the...
Last post
Thanks for the info - now sorted & MOT'd!
it was the link wire in the tow electrics between the plug into the loom and the rear light units, which...
2 Replies
230 Views
Last post by citsncycles Wed Sep 07, 2011 5:02 pm
Where can I get a spare key cut?
by Willy » Tue Sep 06, 2011 1:31 pm
First post
I've just bought Bob's old Athena, and it only has one key (which is in good shape and works perfectly in both door and ignition). I've never before...
Last post
Timpsons shoes if you have one nearby. £5 per key which is guaranteed to work, if cut from one of their blanks. :)
8 Replies
437 Views
Last post by mds141 Wed Sep 07, 2011 12:08 pm
Lucas CAV Fuel Filter Change
by Tim Leech » Mon Sep 05, 2011 4:24 pm
First post
Never done one before, any pointers?
Does it just unscrew
Cheers!
Last post
I was going to say there is a hole in the other end so will be swopping the drain plug!
I've never had a new filter supplied without a new drain...
6 Replies
469 Views
Last post by Tim Leech Tue Sep 06, 2011 11:42 am
Speedo cable purchase
by Turbo Killer » Fri Jul 29, 2011 7:45 pm
First post
Since getting my BX i have used it as everyday transport, it hasn't missed a bit and i really enjoy driving it. A few days ago i got the clicking...
Last post
OK Cheers, I'll put an ad in the sale/wanted section.
13 Replies
758 Views
Last post by Turbo Killer Tue Sep 06, 2011 7:35 am
Estate rear bumper removal
by sdelasal » Mon Sep 05, 2011 7:07 pm
First post
okay - I've removed the four torx screws on the top lip of the bumper and i've removed the bolts holding the two brackets underneath. So now it's...
Last post
If you look at the gap between the rear lights & the top of the bumper you should see some discs, these are the bolt heads, pop the rear lights off &...
6 Replies
461 Views
Last post by MULLEY Mon Sep 05, 2011 9:59 pm
DIY Return Pipe Work in Progress
by Brian » Mon Aug 15, 2011 1:37 pm
First post
Hi Folks,
Well, here is a picture of the progress so far.
Aluminium block, drilled and tapped to suit adapters
I do not want to cannibalize the...
Last post
Couldn't really figure out a more fitting one (due to my extremely limited mastery regarding the finer aspects of teuthology ). :lol:
15 Replies
5427 Views
Last post by rmattila Mon Sep 05, 2011 9:36 pm
front suspension parts nut sizes..
by themildbunch » Thu Sep 01, 2011 11:17 am
First post
I'm going to redo one dodgy droplink and tackle my very worn wishbone bushes next week and I need to get the correct replacement nuts..
Can anyone...
Last post
Yeah, the wishbone nuts are big - but I like the look of shiny new parts and I thought that nyloks should only be used once?
Check out that...
8 Replies
601 Views
Last post by rmattila Mon Sep 05, 2011 5:19 pm
TRi TRi122?
by B-Hive » Tue Aug 23, 2011 12:43 pm
First post
Not sure if it a tech question but how does one identify the difference between an 88 TRi and an 88 122 TRi.?
Excepting of course for the badge on...
Last post
I thought the tzi had a different inlet manifold to the gti, wasn't it smaller and only had one butterfly compaired to the gti's twin butterfly lay...
14 Replies
806 Views
Last post by B-Hive Mon Sep 05, 2011 4:55 pm
Rough running after starting
by Rich » Wed Jun 15, 2011 10:07 am
First post
My 19 Auto petrol (with manual choke conversion) has developed a problem over the last week....
In this warner weather it seems to like to be...
Last post
Italian Tune Up ... I like that :D
If I'm honest with myself I probably treat it abit too gently and rarely rev it above 2500RPM (which is strange...
23 Replies
1597 Views
Last post by Tim Leech Sun Sep 04, 2011 10:44 am
Citroen PR Net
by MULLEY » Thu Sep 01, 2011 9:26 pm
First post
Now that this useful resource has been removed by citroen, thanks by the way :x
Is there anywhere i can look up citroen/peugeot part numbers?
Last post
Thanks Malcolm
5 Replies
344 Views
Last post by Defender110 Fri Sep 02, 2011 8:56 am
Is my car Venetian Red??
by Ian_Fearn » Mon Aug 29, 2011 3:04 pm
First post
Need to get some paint for the underbody... Is it Venetian Red, paint code EJX?
Last post
Hmmm, yes that did occur to me. Perhaps they were being ironic . . . or summat? :shock:
14 Replies
2353 Views
Last post by Paul296 Thu Sep 01, 2011 3:09 pm
Anyone ID this pipe?
by Gibbo2286 » Wed Aug 31, 2011 6:20 pm
First post
I have this new pipe in its Citroen bag but the number has been obliterated, It's a 4.5mm pipe measured carefully round all its bends it's about...
Last post
You're correct Malcom, I hadn't thought to look behind the plastic caps.
Definitley a new Citroen part though
6 Replies
390 Views
Last post by Gibbo2286 Thu Sep 01, 2011 8:39 am
Wanted: Rubber door seal for driver's door
by maxgreenwood » Wed Aug 31, 2011 2:25 pm
First post
Anyone got one?, mine has been rubbed into divine holiness by some previous owner getting in and out.
I should be at the CXM rally Saturday.
Also...
Last post
Hi Max,
I have a good spare Driver door seal available and I too should be at the CXM rally on Saturday (All being well) PM sent !
:)
.
1 Replies
197 Views
Last post by RxBX Wed Aug 31, 2011 4:42 pm
BX Haynes manual
by anaconda » Mon Aug 29, 2011 4:21 pm
First post
Ebay has manuals for petrol versions but I cant locate a manual covering diesels. Im no good with cars but try to go it a go when I can. Im looking...
Last post
Now i'm depressed.....I can see the forum having to guide me through a gerbox oil change! :lol:
Fortunately it's very easy! And actually, that...
15 Replies
1156 Views
Last post by KevR Wed Aug 31, 2011 4:33 pm
Towing Weight
by mds141 » Sun Aug 28, 2011 5:51 pm
First post
Been having house decorated and i can't locate my handbook. What is the max towing weight for a braked trl for the BX 16 valve. Looking at a caravan...
Last post
EDIT: Post 1997 . :oops:
11 Replies
560 Views
Last post by mds141 Tue Aug 30, 2011 5:13 pm
Need to change pressure regulator
by axbx » Sat Aug 27, 2011 9:27 am
First post
Hello everyone
I recently changed the main accumulator sphere on my 1989 TurboDiesel, but when I tightened the 12mm after fitting the new sphere, I...
Last post
Thanks alot :)
10 Replies
667 Views
Last post by axbx Mon Aug 29, 2011 9:15 pm
weber free flow air cleaner
by B-Hive » Sun Aug 14, 2011 8:05 am
First post
Gave the GT a mini tune up today as well as an italian tune-up fun fun!!
Got me thinking about the possibility of putting a free flow air cleaner to...
Last post
Apologies if this ground has already been covered, but could this be a clogged fuel filter or a collapsing fuel line?
4 Replies
330 Views
Last post by citsncycles Mon Aug 29, 2011 9:02 pm
Ignition problem, starter is turning but no ignition
by TB2 » Mon Aug 29, 2011 2:04 pm
First post
Hello everyone,
well, it turns out that the engine is not running quite as smooth just yet. The problem is that most of the times I try to start the...
Last post
Yes they're allright.
Just now, after some 2 hours of being left alone it started immediately and without a problem. I'm starting to suspect that it...
2 Replies
305 Views
Last post by TB2 Mon Aug 29, 2011 5:16 pm
Where does this piece belong?
by TB2 » Wed Aug 24, 2011 3:16 pm
First post
When I got the head back from the specialist, they had removed a few bits like the injectors, glow plugs and intercooler mountings. They put...
Last post
glove box with any other spare nuts and bolts :lol: :lol: :wink:
regards malcolm
Thats what the ashtray is for!
thats only once the glove box...
6 Replies
489 Views
Last post by citronut Fri Aug 26, 2011 7:43 pm
1.9 n/a tuning
by Philip Chidlow » Tue Aug 23, 2011 11:35 pm
First post
OK, not tuning as such, but given that my 1.9 diesel seems to be under-performing, and giving suspiciously good emissions readings - even at 157000...
Last post
Had a similar problem with a car of mine albeit a petrol one, the emissions were too lean (had been fiddled with for the MOT), it was fine on choke...
3 Replies
287 Views
Last post by Tim Leech Wed Aug 24, 2011 10:20 am
Engine question
by adamskibx » Thu Aug 18, 2011 1:46 am
First post
8y7y9809-
Last post
a beautiful post. Quiet. Still. Open ended. Let us make of it what we will.
7 Replies
487 Views
Last post by maxgreenwood Fri Aug 19, 2011 12:58 am
A bit of rust
by anaconda » Thu Aug 18, 2011 8:11 pm
First post
Our new 1.9 diesel has a bit of rust at the junction of the sill and rear door openings, adjacent to the plastic moulding, not uncommon apparently....
Last post
Happily he takes cash without the worry of VAT!
I bet he'll be pleased you've put this out on a public forum too! :?
Put what out...
4 Replies
410 Views
Last post by anaconda Thu Aug 18, 2011 9:49 pm
Cardboard / compound gasket for inlet/exhaus manifold (TD)
by TB2 » Wed Aug 17, 2011 5:51 pm
First post
Hello everyone,
finally my spare parts arrived from the supplier. However the gasket they sent me for the inlet and exhaust manifolds are made of...
Last post
Mhh, I was impatient today and went on ahead putting it in place before reading your posts. I simply hope it will be fine since it has been sold to...
3 Replies
315 Views
Last post by TB2 Thu Aug 18, 2011 9:01 pm
Speedo Problem
by Ian_Fearn » Mon Aug 08, 2011 5:27 pm
First post
Hello everyone,
My speedo no longer works.....
Just to quickly set the scene, the speedo on my TZD Turbo has always been troublesome. For the...
Last post
No i've not. Will give him a try tomorrow. Thanks
15 Replies
1354 Views
Last post by Ian_Fearn Wed Aug 17, 2011 9:52 pm
Front Height Corrector Return Pipe
by Ian_Fearn » Mon Aug 08, 2011 7:18 pm
First post
After years of completely trouble free motoring my TZD is finally throwing its toys out of the pram!
What I believe is the return pipe (thick rubber...
Last post
The Valeo clutch came from AEP Direct so a reputable supplier.
Anyway, hydraulic leak sorted and also i've changed the clutch to an LUK one. I can...
11 Replies
677 Views
Last post by Ian_Fearn Wed Aug 17, 2011 6:11 pm
Rtn pipe from pressure reg/correctors to reservoir (petrol)
by mnde » Wed Aug 03, 2011 2:58 pm
First post
I've been given two part numbers for this pipe based on Rp number:
>5167 (1st Jan 1991) = 95 603 421
5167> = 96 119 048
My car is Rp 5113
Can...
Last post
Hi Mark,
I have a similar problem on the TZD, this has 3 small diameter pipes connecting to the main pipe just right of the LHM tank, and have been...
6 Replies
556 Views
Last post by Brian Mon Aug 15, 2011 1:19 pm
Coolant warning light?
by Paul296 » Fri Aug 12, 2011 12:24 am
First post
My coolant warning light keeps coming on intermittently (usually when i go round a corner or over a bump). I've checked the coolant level and it all...
Last post
I fiddled with the sensor connection at the back of the header tank and it seems to have cured it? Do I get another 'spanner' now? :D
No, just a...
8 Replies
490 Views
Last post by Way2go Mon Aug 15, 2011 2:10 am
Availability of BX strut repair kits
by JohnW » Fri Aug 12, 2011 9:54 am
First post
Hope this is the right place for this query!
I'm looking for a couple of seal kits for my front struts - 1990 BX19 TZi Break. The front is now nice...
Last post
That makes really good sense to me.
Last week we pulled them out and lubed them in that way but didn't leave them inverted for long. Now the car is...
10 Replies
614 Views
Last post by JohnW Sun Aug 14, 2011 10:45 pm
Accessing front struts/LHM diy job
by anaconda » Sun Aug 14, 2011 6:38 pm
First post
Im giving the front strut LHM lube a go as per the suggestion on the BX DIY page. What is the best way to access the struts? Im assuming its simply a...
Last post
Thanks for the tip, sounds reasonably straightforward.
2 Replies
276 Views
Last post by anaconda Sun Aug 14, 2011 8:48 pm
removing a tough accumulator sphere
by B-Hive » Mon Jul 18, 2011 1:52 pm
First post
any tips for removing a very tight accumulator sphere....a cloth strap doesnt work..and I'm trying a chain strap tomorrow with a whack to crack the...
Last post
Excellent result. A fresh accu sphere makes all the IMHO. On a side note i had trouble removing the oil filter on my Honda Firestorm . Putting that...
33 Replies
1620 Views
Last post by mds141 Sat Aug 13, 2011 5:54 pm
oil dip stick
by cacaolat » Fri Aug 12, 2011 12:36 pm
First post
I am looking for a new oil dip stick for my 1.6 petrol. There is an expensive new one at ebay. Does anyone know a better source.
The one on ebay is...
Last post
Hi Way2go
I have had this recommendation in the past and have placed an order with GSF, but then it has been cancelled as they where out of stock....
4 Replies
299 Views
Last post by Way2go Sat Aug 13, 2011 3:04 am
LHM Change
by mds141 » Thu Aug 11, 2011 8:50 pm
First post
I did a quick and easy change last week and noticed a huge improvement ie suspension more responsive, steering much lighter. However after reading...
Last post
I think you must have mis-read or understood it, the only way to get the majority of the lhm bank into the lhm tank is by having it in low &...
2 Replies
245 Views
Last post by MULLEY Thu Aug 11, 2011 10:05 pm
BX braking
by djm666 » Tue Aug 09, 2011 8:40 am
First post
I have recently started getting another BX on the road and have come across a strange thing with the brakes.
when i got the car it was not going,...
Last post
Barnsley BXer's car had this same problem. When you pressed the pedal there was little effect, but with the slightest more pressure they would really...
10 Replies
627 Views
Last post by BX596 Wed Aug 10, 2011 7:34 pm
Clutch cable replacement & cheapo plastic clip 19RD
by sdelasal » Sat Aug 06, 2011 9:52 pm
First post
I've been wrestling for too many hours changing the clutch cable on the 19RD. The Haynes description is laughable - okay it is for a 1.4 where guess...
Last post
Clutch is very nice now - no juddering on pull away. I am a little surprised a cable change could make such a difference.
7 Replies
408 Views
Last post by sdelasal Mon Aug 08, 2011 7:43 pm
What is this leak?!
by PhilGreaves » Mon Jul 19, 2010 1:13 pm
First post
Well as the title implies my car has sprung a water leak...from the inside!! Well Citroens do like to be different...
Ive taken some photos and ill...
Last post
Yes was better that way- not in my face not in the footwell.
Had a phone call from the garage today. The guy fitting the heater matrix was wondering...
33 Replies
2351 Views
Last post by PhilGreaves Mon Aug 08, 2011 4:57 pm
dangerous to drive on a worn ball joint?
by maxgreenwood » Sun Aug 07, 2011 11:13 pm
First post
i've tracked down my strange front suspension behaviour to a worn lower ball joint on driver's side. The inner part of the tyre is wearing which i...
Last post
you can check the spheres your self, with the engine running and hight set at normal driveing position, press on and off on each of the corrners,
i...
5 Replies
354 Views
Last post by citronut Mon Aug 08, 2011 1:37 pm
cyclic knock when braking
by B-Hive » Thu Aug 04, 2011 8:45 am
First post
Hello
With the GT now my daily driver (and loving it),its time to sort out and refine things as I experience new issues.
My issue at the moment is...
Last post
I drove a transit minibus from Maidstone to Stansted with a strange regular knocking - turned out I'd pressure-washed in the wheel-arches and...
8 Replies
473 Views
Last post by scarecrow Sun Aug 07, 2011 9:57 am
priming a lucas diesel pump
by sarahjaneking » Mon Aug 01, 2011 10:21 am
First post
Hi everyone,
I have tried searcing but couldn't find quite what I needed,long story short my tzd experienced a dramatic loss of power and cut out on...
Last post
this one has never been run on veg, that ate the plunger on my txd causing it to not stop lol the plunger is still attached at the end, I will post a...
16 Replies
1492 Views
Last post by sarahjaneking Sat Aug 06, 2011 2:18 pm
Fuel filter 1.6 petrol
by Mothman » Fri Aug 05, 2011 7:31 pm
First post
Hi all,
just fitted a new fuel filter to my 16TGS. Bought it on feebay, a Mann WK 613. Much bigger than the previous one which was a clear plastic...
Last post
Hi all,
just fitted a new fuel filter to my 16TGS. Bought it on feebay, a Mann WK 613. Much bigger than the previous one which was a clear plastic...
1 Replies
182 Views
Last post by Tim Leech Fri Aug 05, 2011 10:38 pm
Grey bumper paint code.
by anaconda » Sun Jul 10, 2011 4:40 pm
First post
Couldnt find this in the tecky section. Does anyone have the grey bumper paint code for the late BX? It the grey found on bumpers of the silver...
Last post
Just found it..main body is Gris Chrystal Met which means the bumper on a 1991 (not 92!) is code FYF.
Thanks
...paint available here:
7 Replies
1064 Views
Last post by anaconda Fri Aug 05, 2011 3:17 pm
Power steering heavy
by Alastair » Tue May 17, 2011 11:41 pm
First post
So my 1989 1.9 diesel seems to have heavy power steering at low engine revs....This seems to be a recent thing....about six months ago I used...
Last post
My fdv is leaking as well, so perhaps i'll change both & then see if the steering is sorted or not. I was presuming that ast the pump appears to be...
12 Replies
1141 Views
Last post by MULLEY Thu Aug 04, 2011 6:58 pm
Inlet manifold and other gaskets: How and where?
by TB2 » Thu Aug 04, 2011 11:34 am
First post
Hi again,
I wanted to refit the manifolds to the head today and I noticed the gaskets Oscar had sent me don't fit. Are there actually different...
Last post
You will need to get the correct inlet/exhaust manifold gasket for a turbo diesel.
Its the same gasket on the ZX TD if that makes getting hold of...
2 Replies
262 Views
Last post by Jaba Thu Aug 04, 2011 5:25 pm
Weber Carby mod---tuning
by B-Hive » Fri Jul 01, 2011 8:40 am
First post
Whilst I'm here, just thought I'd let you know of a little modification on my GT's weber that has made life so much more bearable. The problem was...
Last post
32/34 weber?
how much?
11 Replies
626 Views
Last post by NeilGP Wed Aug 03, 2011 6:14 pm
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum