Can someone tell me the O/Dia of the 2 small rubber pipes on a BX that push fit onto the fluid reservoir.The pipes are splitting cars in France im in...
Last post
cut the split sections off then cut a short section back a bit more, and join with a length of 3.5 kunifer,
the bx is still piling up the miles as the saab is still having fueling problems at high rpms. it is now due a service.the oil is still pretty clean...
Last post
If you look halfway down this page, you may find a topic on the very same subject... :wink:
Work on the new 16TZS is progressing, received the clutch cable and rear spheres yesterday which i'm hoping to fit in the next few days. I've got to...
Last post
Maybe you should buy 3 so you can have a spare? :lol:
The guy who's selling them is a member on here (artic steel) but he's not on here regularly....
Found an oddity I hope you experts can shed some light on. I ordered a filter for the BX19 TXD, and while working on the wagon the mk 1 eyeball told...
Last post
My grandad used to enter his motorbikes in VMCC concours competitions - that is until he was marked down on a bike because he had (correctly) painted...
The wife's white BX has had a small leak from somewhere around the regulator base for a long time now, locating it not having been helped by previous...
Last post
Those allen key bolts on mine look a bit rusty & i was worried that they would snap off if i tried to undo them, i've got the exact same leak i think.
Handbrake lever has gone a bit sloppy when its released. I cant quite remember the routine for manual adjustment of it using the footbrake pressure...
Last post
i tell my customers to adjust the hand brake park on level ground like petrol station forcourt, engine running, hand brake off, press the brake pedel...
Plugged in a trailer tonight (which has a 21w interior light run from the LH sidelight circuit) and instantly the LH sidelight and number plate lamps...
Last post
the connection problem could be because given the age of our BX's, wires may have oxidised inside the crimps progressively reducing the connection...
Does anyone know the intimacies of the 1900cc petrol and diesel blocks. I am wondering if it is feasible to 'easily' swap a 1.9 petrol to 1.9d and in...
Last post
Nope, they've sorted out the real issue, i'm sure i posted up the details of the chap that pm'd me?
The honeymoon is over. Hanibal, my wonderful 1993 TZD, after giving no hint of trouble for 3,000 miles, has sprung a water leak. Coolant is dripping...
Last post
the description TANK is not actually what the part is, it is a water branch,
PSA have a starange way with words and more offten than not there...
Are these the exact same one's that will fit all models? Reason for asking is that i've got some which came from a valver & wondered if they'll fit...
Last post
Aha, many thanks for the info Riku. I haven't had a chance to inspect the pipes, so i won't risk getting it fitted just incase....I'll get the garage...
Hi all,
Are these things still available? Mine are knackered and full of holes. Can you still get them?
If not, is there a member who has a couple of...
Last post
xantia ones do fit with slight mod. i made my own from cx ones once. but had to spend a lot of time cutting.
Can anyone summarise what might be required to turn what is normally a fantastic bx into a less economical 4x4 :shock: lol.. I have a requirement to...
Last post
Hi Chris, I was referring to trying to buy the silver estate. I got your pics no problem - cheers.
Hello Bx owners! I have a peugeot 405 4x4 which has a similar rear suspension to a bx. Its going to be used off road so have got some taller springs...
Last post
I really don\'t understand the logic of a hydraulic system just for the rear of a 405? why not use conventional springs?
I need to replace the front arm bushes and I was reading in The Haynes:
' If the pivot bushes in the suspension arm are worn and in need of...
Last post
I got the right hand side arm off today. The rear 24mm spindle nut was tight and its not possible to get a socket onto it so I had to use a spanner....
Is it possibile to change the oil and filter TOO often. As the oil contains a detergent agent would changing the oil say every 1000 mls do more harm...
Clever one,this. My cooling fans cut in when I start going fast(ish)! My coolant level is fine, it\'s not overheating and to my knowledge they cut in...
Last post
In fact I swear if it comes on at the lights I start moving backwards!
If the fan is pushing air out at the front then that\'s your problem :D...
is the ride height -the level it sits at parked - adjustable? is it easy? id like to lower it a touch if possible.mine looks to have too large a gap...
Last post
To do it properly, you should get the car lifted so that it stands on the wheels. Set the engine idling, suspension height lever in normal position,...
So now the CV joint is out without any problems, and all cleaned up waiting for the new gaitors. I already have the outter boot but decided to do the...
Last post
Re the track rods balljoints, I don't reckon that the boots were ever available separately. You just buy the complete unit.
I’ve had BXs since the mid ‘80s and have undertaken all the usual maintenance on them including changing spheres. However I have a situation where my...
Last post
BX Mad Wrote:
I had thought about making one of those tools to measure pressures so this experience now makes it an essential piece of kit.
I can't get my carkey to go into the ignition...(its not the key, I have two of them, and they work in the doorlocks)
I have to use a flashlight and...
Last post
the tinny stainless steel blade's across the tumblers in the lock barrel have worn through,
the best fix is a new or good second hand ignition...
This is something that has plagued BX 16vs since they rolled off the production line... And mine is suffering :?
The problem only occurs when the...
Last post
A few points you could try, to run through a process of elimination.
Before switching off when warm. Hold the throttle at 1500-2000 rpm, Then switch...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
