TZD wing mirrors
by Mothman » Sun Apr 08, 2012 7:23 pm
First post
My 'new' TZD Estate has an electric nearside wing mirror but a standard manual one for the offside. The electric gubbins to alter the position works...
Last post
Fingers, pissed again!!
Andy
3 Replies
240 Views
Last post by Mothman Sun Apr 08, 2012 9:39 pm
0 Replies
293 Views
Last post by YorkieG Sat Apr 07, 2012 12:24 pm
Play in tie rod assembly
by axbx » Sun Apr 01, 2012 9:53 pm
First post
Hey guys
I was just wondering, is the tie rod (?)
adjustable on my bx trd?
When the wheel is jacked up in the free air, and I try to jolt the...
Last post
Hi
any lateral (left/right) play will be down to the axial joints..(the lower component on your image).. these wear and will give play similar to...
5 Replies
389 Views
Last post by B-Hive Sat Apr 07, 2012 12:18 pm
Tyre Dilemma
by kiwi » Sat Mar 31, 2012 12:50 am
First post
Going into uncharted territory here in asking this obvious question
But what size Tyres are the correct ones to fit to the TXD?
Currently have...
Last post
As the guys say the standard size on all Mk2 BX Diesels (except a hurricane) was 165/70R14 MXL from new, you can fit 175/65R14 or 185/60R14 without...
6 Replies
412 Views
Last post by Tim Leech Wed Apr 04, 2012 9:14 am
Petrol questions
by Willy » Mon Apr 02, 2012 11:04 pm
First post
A carburettor-type BX engine is perfect in every way and 1,000,000 times better than its diesel equivalent, except...
Still fast idling once warmed...
Last post
I would go for 0.7,as the gap increases with mileage anyway.
2 Replies
764 Views
Last post by Mike E (uk) Wed Apr 04, 2012 8:36 am
Tips on replacing a sunroof
by B-Hive » Sun Apr 01, 2012 7:17 am
First post
Hi ..before collecting my new TRS (boast boast), I am going to use the time to install a replacement sunroof in the TRi ..I know its not a picnic of...
Last post
Great link
Thanks..it'll be very helpful
7 Replies
494 Views
Last post by B-Hive Wed Apr 04, 2012 4:37 am
hydrogen conversion on a tzd
by tzd » Sat Mar 31, 2012 4:41 pm
First post
Hi everybody, with the ever increasing price of diesel I'm thinking of doing a hydrogen conversion on my TZD. It will be a system where hydrogen is...
Last post
:lol:
9 Replies
1703 Views
Last post by BX Meteor Tue Apr 03, 2012 8:05 pm
Sounds from front wheels
by axbx » Mon Mar 19, 2012 10:46 pm
First post
Hello fellow BXers'
Im having some frail nerves at the moment, because when I turn my wheels to the right, and especially when backing up, also when...
Last post
Worn front wishbone rubber bushes are a common problem. My drivers side rear bush is quite worn and although passed the last MOT on an advisory I do...
8 Replies
526 Views
Last post by themildbunch Mon Apr 02, 2012 3:31 pm
Hydraulic leak
by barry badger » Mon Apr 02, 2012 12:34 am
First post
The next major problem with my tzd is an internal leak in the hydraulics. When the engine is running there sounds like a large amount of fluid...
Last post
maybe you have more than one fault,
Martin knows citroen hydraulics inside out so i would trust what he says,
what can cause the car to sink quickly...
1 Replies
213 Views
Last post by citronut Mon Apr 02, 2012 8:14 am
rainwater leak
by barry badger » Mon Mar 05, 2012 12:23 am
First post
I have a tzd estate that is leaking when it rains.
I have stripped out the roof lining and the A B and C pillar trims. When the car is hosed the...
Last post
I think I have finally fixed my water leak. I have sealed the roof cappings using Sikaflex 512 sealer and given the car a good hosing down, so far so...
18 Replies
1043 Views
Last post by barry badger Sun Apr 01, 2012 10:33 pm
Damage to Rear Ram Bellows
by Brian » Tue Mar 27, 2012 6:44 pm
First post
Thought this may be of interest.
I noticed a small LHM leak from the near side rear suspension ram bellows today.
On investigation, it seems that...
Last post
super glue (the quality loctite stuff) works very well on rubber.
if you clean it up with IPA first (the solvant, not the beer,) you can probably...
6 Replies
570 Views
Last post by Mike E (uk) Fri Mar 30, 2012 8:34 pm
fix for worn door check strap mounts....?
by themildbunch » Thu Mar 29, 2012 9:13 pm
Like many Citroen's I have the clicky door noise on both front doors on my estate..
The welded on bracket that the check strap rollpin fits into...
0 Replies
298 Views
Last post by themildbunch Thu Mar 29, 2012 9:13 pm
Camshaft Markings Identification
by JayW » Thu Mar 29, 2012 4:59 pm
First post
Does anyone have a list of camshaft markings and applications?
I currently have 2 with the following markings:
DIST 26 88 16
DIST 20 89 1...
Last post
Aren't they stroke and duration numbers? I thought there was a pretty universal standard for these?
Edit
Spot of googling and i think i have...
1 Replies
198 Views
Last post by Vanny Thu Mar 29, 2012 6:28 pm
leaky octopus fixed!!
by themildbunch » Thu Mar 29, 2012 1:46 pm
After weeks of dripping BX and LHM expense I managed to find the time to get this done..
I had a new octopus but thought I'd have a go at fixing it...
0 Replies
360 Views
Last post by themildbunch Thu Mar 29, 2012 1:46 pm
rear spoiler removal?
by Djr88 » Wed Mar 28, 2012 11:35 pm
First post
I want to take the spoiler of my Tzd so I can repaint it I've taken the 2 bolts out,begat else holds them on?
Last post
ok thanks!! :)
3 Replies
378 Views
Last post by Djr88 Thu Mar 29, 2012 6:52 am
can you run engine with pressure relief screw undone ?
by BX Meteor » Sun Mar 18, 2012 1:43 pm
First post
I've got a leak in the rear suspension above the rear exhaust box and I want to turn the car around to be able to work on the back more easily.
LHM...
Last post
Had an idea to get the car temporarily mobile again.
35 Replies
2157 Views
Last post by BX Meteor Wed Mar 28, 2012 7:38 pm
Intermittent GTi running issue + clutch query
by maxgreenwood » Mon Mar 19, 2012 11:05 pm
First post
I plan to get to the bottom of my GTi engine's little foibles when time and money allows to get it running as smoothly as I can.
On a light...
Last post
Did you not notice my reply at the top of the thread?
sorry Way2Go, i missed that, been a bit flat out. Looks like there are plenty of things i can...
14 Replies
813 Views
Last post by maxgreenwood Wed Mar 28, 2012 9:46 am
Washer jets
by Willy » Wed Mar 07, 2012 1:24 pm
First post
...aren't working.
Both tanks are full, it hasn't been freezing here for a month, and you can hear the pump whirring away when you pull on the...
Last post
Tadaa!
11 Replies
565 Views
Last post by Tim Leech Tue Mar 27, 2012 7:58 pm
Paint code etwmr
by sdelasal » Mon Mar 26, 2012 6:16 pm
First post
I have etwmr paint code written in the inner near side wing. Anyone know what this is called in plain english? Gunmetal/dark grey kind of colour.
Last post
Thanks Jay ... I see though that ETW is one of the unfortunate codes to appear in stereo ..
ETW Gris graphite metallic ? ? 70-14 ?
ETW Gris silex...
10 Replies
516 Views
Last post by sdelasal Mon Mar 26, 2012 10:46 pm
Solex wax stat
by Preacher » Sun Mar 25, 2012 6:08 pm
First post
I am having a few problems with the wax stat on the auto choke on my '92 K plate solex carb. wondering if replacement stats are available or a manual...
Last post
what are the prob's your haveing with the wax stat,
the usual one's are the spouts tha water hose's attatch to close up with corosion, quite offten...
2 Replies
301 Views
Last post by citronut Mon Mar 26, 2012 8:51 am
Speedo broken
by maxgreenwood » Sun Mar 25, 2012 8:04 pm
First post
Last night my speedo broke. It started moving about erratically then died and I now have a clicking from behind the dash which increases with speed....
Last post
Thanks for that Kitch that should make progress a bit swifter. I need to take the steering wheel off anyway to realign.
2 Replies
257 Views
Last post by maxgreenwood Sun Mar 25, 2012 9:25 pm
estate boot catch / lock mounting points..
by themildbunch » Sat Mar 24, 2012 3:27 pm
First post
Hi..
Noticed both plastic mounting points for the boot catch, where the bolts screw into have cracked and snapped and the catch is very floppy...
Last post
Had the same problem, lots of araldite and it seems to be holding ok.
3 Replies
226 Views
Last post by KevR Sun Mar 25, 2012 10:33 am
coil wiring
by Mickey taker » Sun Mar 18, 2012 3:52 pm
First post
had a crap couple of days with the meteor,
got new dizzy cap (£26.00 ffs) and rotor +plugs but it still wont start , suspect it may be the coil,...
Last post
well the car has run fine on the standard pump until friday afternoon when in the afternoon sun vapour lock kicked in. Quickly reconnected the...
37 Replies
1965 Views
Last post by Mickey taker Sat Mar 24, 2012 9:12 pm
Electric window mech?
by Djr88 » Sun Mar 18, 2012 10:28 pm
First post
The drivers electric window wasnt working on the tzd i bought i took it apart earlier today and i think there is something missing to stop the mech...
Last post
The drivers electric window wasnt working on the tzd i bought i took it apart earlier today and i think there is something missing to stop the mech...
7 Replies
510 Views
Last post by B-Hive Sat Mar 24, 2012 7:20 am
surges and sometimes erratic idle.
by Philip Chidlow » Fri Mar 16, 2012 10:00 pm
First post
19 n/a. Lucas pump. Starts fine, runs well generally, doesn't smoke much and is relatively spritely. No unusual sounds and a recent fuel filter...
Last post
Well, i've certainly had no recurrence of the problem since. Oh and just in case the vultures are circling, i also had no issues with the fuel...
8 Replies
546 Views
Last post by JayW Thu Mar 22, 2012 8:08 pm
Cam belt change interval?
by ben » Tue Mar 20, 2012 8:25 am
First post
'morning gents does anyone have a rough guide as to what mileage intevals cam belts should be replaced ?
This is on my n/a BX TXD .
Last post
It's incredible that they work anyway.
Take the head off and try turning the cam by hand
And when you translate that to rotational power, it must...
34 Replies
2125 Views
Last post by KevR Thu Mar 22, 2012 9:41 am
Hand brake cable
by Philip Chidlow » Tue Mar 20, 2012 1:15 pm
First post
Are these handed? Does anyone have a part no. for a n/s one if so?
Phil
Last post
Just checked all the brakes on the BX today. In good fettle.
I've had an issue with a garage fit cable from a while ago ( old and nearly past it ) ....
11 Replies
610 Views
Last post by Discoil Wed Mar 21, 2012 7:59 pm
Heater tap dissection
by Vanny » Mon Mar 19, 2012 9:52 pm
First post
As part of a concerted effort to get the BX back on the road, the weekend saw not one but three heater taps dismembered! Ultimately it was quite easy...
Last post
Yes, how exactly do you get them off in the first place? I think I need to do this operation, mine is stuck fast.
The TZS has gone that way as well...
9 Replies
596 Views
Last post by kiwi Tue Mar 20, 2012 7:57 pm
Auxiliary fuel tank
by axbx » Tue Mar 06, 2012 2:03 pm
First post
Any ideas on where to put it in a bx break? And is this hard to mount onto the already existing system? How does one switch between the two?...
Last post
No its not for when running out of fuel, its to be able to run on two kinds of fuel, and switch between them when suitable ;)
3 Replies
319 Views
Last post by axbx Mon Mar 19, 2012 10:58 pm
Rear End Lift
by Tim Leech » Tue Feb 28, 2012 1:21 pm
First post
Apologies if this has been covered a million times afore, noticed yesterday driving the TZI that the rear end has a tendency to lift up slightly when...
Last post
If anything, the rear of my Meteor sort of 'squats-down' under braking, and the brakes are P-H-E-N-O-M-E-N-A-L!!!!, but I guess that's normal for...
30 Replies
1131 Views
Last post by oilybox Sun Mar 18, 2012 11:52 pm
55bhp 2.0 HDI - any thoughts?
by Kitch » Thu Mar 01, 2012 8:29 pm
First post
I'll copy what I wrote on another site. Not really in to diesels and don't know much about them. People on PH have suggested wastegate jammed open,...
Last post
Not quite that quick, but not far off. Cracked 100mph for the first time the other night! :lol:
24 Replies
1316 Views
Last post by Kitch Sun Mar 18, 2012 9:45 am
Windscreen Seal
by Tim Leech » Thu Mar 15, 2012 9:40 pm
First post
The one on the DTR will have to come out when the paint on the A posts is taken care off, is it a case of just cut it off and get a new one?
Thanks
Last post
NT Louth had one - the screen company I used in January could get a pattern one but this has rounded top corners rather than squared off. Fits but...
11 Replies
542 Views
Last post by mds141 Sat Mar 17, 2012 10:02 am
Blown fuse?
by Paul296 » Mon Mar 12, 2012 8:52 pm
First post
Driving back from Mulleys on Sunday, I noticed that the horn and the heated rear windscreen have stopped working in my Hurricane - they were both...
Last post
Dear Paul.
Use a test-light Paul to check whether you have a feed on your horn
and on the terminals for the heated rear window too. :wink: It is the...
10 Replies
728 Views
Last post by Paul296 Wed Mar 14, 2012 9:50 pm
MK 1 rubber bits on the front wings.
by Mothman » Tue Mar 13, 2012 1:30 pm
First post
Can anyone tell me what these rubber strips are officially called? They fit in between the bottom of the front wing and the top of the bumper. One...
Last post
All stuck on with a contact glue, Sophie now looking as she should at the front end.
Andy
6 Replies
330 Views
Last post by Mothman Wed Mar 14, 2012 7:21 pm
Cutting Out Mystery
by hvanman » Mon Mar 12, 2012 9:47 am
First post
Something strange has happened twice now to the 17 TZD that maybe someone has some idea's on??
On approaching a junction and down changing, while...
Last post
Well the top lever of the two was a little stiff, so I have lubricated and will see if that fixes it, but it only happens rarely, so may take a while...
10 Replies
729 Views
Last post by hvanman Wed Mar 14, 2012 1:19 pm
TZD hp pump adjustment
by mikesg » Sun Mar 11, 2012 9:59 am
First post
Hi all. I need to adjust the belt on my tzd hp pump. Could somebody tell me what size spanners I need please?
Thanks
Mike
Last post
Thanks for your input gents
Mike.
3 Replies
382 Views
Last post by mikesg Mon Mar 12, 2012 6:06 pm
Pipes with ends where there shouldn't be.
by Wooscary » Tue Jan 17, 2012 12:27 pm
First post
Hello
Day off today, so went to have a tinker.
Thought I'd try some strut lubing, which as an aside seems to have been a success.
While looking...
Last post
Definitely think the old one has seen better days.
Thank you all for the invaluable advice.
35 Replies
3597 Views
Last post by Wooscary Mon Mar 12, 2012 3:10 pm
Mk 1 rear seat belts
by Mothman » Fri Mar 09, 2012 3:54 pm
First post
Sophie only has one rear seat belt for the passenger side. Should there be two? I have a rear set from the scrapper if neccessary.
Andy
Last post
Interesting. I always assumed the cut-off was 1986 for some reason, but it appears to be 31 March 1987. In that case, I'm taking the belts out of the...
11 Replies
581 Views
Last post by Dollywobbler Mon Mar 12, 2012 2:29 pm
Handbrake sticking
by Dollywobbler » Sun Mar 11, 2012 1:08 pm
First post
So, I backed off the piston in the RH caliper. Result. That wheel no longer seems to bind. Car off jacks, gave it a push. Stuck solid. Hmmm.
Lift...
Last post
I have one used but serviceable handbrake cable if you need it.
5 Replies
298 Views
Last post by Oilyspanner Mon Mar 12, 2012 12:53 pm
Sender fault?
by Willy » Sat Mar 10, 2012 11:26 pm
First post
For the past few months of driving the dash oil indicator has shown about 90-100% - needle far to the right, like Thatcher. Then, almost overnight it...
Last post
..that_ as well
8 Replies
402 Views
Last post by BX Meteor Sun Mar 11, 2012 12:16 pm
Bosch pump settings & Knocky knock...
by JayW » Thu Mar 08, 2012 9:25 pm
First post
Does aanyone have a guide for setting up the Bosch pump? Mine smokes quite badly (bad enough for MOT failure) when pushed and is also not quite...
Last post
warm the part of the subframe with a welding torch,
The plate is inaccessible with the cylinder/sphere in situ and i'll be buggered if i'm gonna...
8 Replies
405 Views
Last post by JayW Sat Mar 10, 2012 8:15 am
Exhaust Manifold Removal 1.9i 8V.
by Tim Leech » Sun Mar 04, 2012 9:12 pm
First post
Since I bought the TZI it had a very slight blow from the exhaust manifold, which all but disappeared when it got warm, however the 200 mile round...
Last post
Dear Tim.
You should be able, once you have the manifold off Tim, to be able
to have it welded at a machine shop or engine crank regrinding...
15 Replies
728 Views
Last post by bx petrol auto saloon Fri Mar 09, 2012 10:01 pm
Front Caliper Slider Pins
by MULLEY » Sat Feb 11, 2012 9:01 pm
First post
I'm in the process of re-conditioning an old seized brake caliper.
So far i've cleaned the caliper ultrasonically & removed the slider pins &...
Last post
Sorry you're wrong, i cleaned them & de-rusted them in the ultrasonic cleaner, so it does do heavy duty cleaning. I used seaclean to de-rust whilst...
10 Replies
521 Views
Last post by MULLEY Fri Mar 09, 2012 9:57 pm
Hydrogen Generation for Diesel engine
by MULLEY » Thu Feb 02, 2012 9:07 pm
First post
Found this, does this work & will it do what the manufacturer say's or is it a load of tosh?
There appears to be 2 different methods of using...
Last post
Just reviving an old thread that i started this year, has anyone got any experience of using Nitrous Oxide with a diesel engine?
I've been thinking...
10 Replies
580 Views
Last post by MULLEY Thu Mar 08, 2012 8:23 pm
Outer CV joints
by citsncycles » Sat Feb 25, 2012 4:53 pm
First post
Something for those of you wanting to keep your BX's long term to think about:
I was in the local motor factors yesterday trying to order a BX outer...
Last post
If you need pics Tim, let me know.
Andy
19 Replies
947 Views
Last post by Mothman Thu Mar 08, 2012 7:08 pm
N/A cam into TD engine - benefits?
by KevR » Tue Mar 06, 2012 9:21 am
First post
Right, I might have dreamt this, but I seem to remember someone on here a while back fitting a 1.9 N/A camshaft into a 1.7TD engine, and claiming...
Last post
I've got a few spares already (and a spare engine to rob bits from), but they're freely available – cit or peugeot dealers should have them on the...
5 Replies
364 Views
Last post by KevR Tue Mar 06, 2012 11:54 pm
Steering column disassembly
by ghaddon1701 » Tue Feb 21, 2012 8:07 pm
First post
Hi everybody,
Has anyone ever had experience in disassembling the steering column itself to change the bearings etc? Or do you have to replace the...
Last post
It was indeed the bush - put it back in place, peened the end of the housing over to hold it, there, sorted.
I can recommend taking the opportunity...
11 Replies
923 Views
Last post by KevR Mon Mar 05, 2012 9:48 am
petrol return pipe ?
by Mickey taker » Wed Feb 15, 2012 12:14 am
First post
as you know my meteor has an electric fuel pump,
I am thinking of returning it to the origional manual pump but there is a pipe plugged with a...
Last post
but you need to register. It gives prices in Euros (but seem to be about the same in pounds!) and pictures - looks to be the same screens as the...
68 Replies
4729 Views
Last post by mat_fenwick Wed Feb 29, 2012 10:49 pm
what do you think guys?
by ace_the_bass » Sat Feb 25, 2012 11:18 am
First post
a few times lately while ive been driving all my stop lights have come on for a second and then gone out and my oil pressure needle has been abit up...
Last post
Thanks for the help chaps. Will keep you posted
17 Replies
1015 Views
Last post by ace_the_bass Wed Feb 29, 2012 2:08 pm
Wheel trim refurbishment
by Philip Chidlow » Wed Feb 22, 2012 5:17 pm
First post
In an uncharacteristic moment of clarity I've decided because replacement GTi/TZD hatch-style 'dishy' trims have not been forthcoming, I am minded to...
Last post
Ford Moonstone Silver was a perfect match on the AX, and TG trims were the same shiny silver colour back in the day.
Excellent i'll try and...
8 Replies
473 Views
Last post by Defender110 Sun Feb 26, 2012 10:43 pm
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum