Gents, i am getting a knocking noise from under the rhs wheel arch when i go over a bump, and this can be felt on the sterring.
Any ideas as to what...
Last post
The knocking noise must have been the drop links as i changed the RHS side one yesterday and it seems fine now. Thanks for all the help gents.
BTW...
After not using it for 5 days I started my car this morning. All seemed fine. After a very short journey I parked it and wanted to drive off again a...
Last post
The battery terminal has stretched through being overtightened. The negative is the earth cable so you should easily be able to buy a new cable with...
Where the cable sits into the alloy housing, and is threaded with a adjuster nut and locking nut, is it...
Last post
Plenty of penetrating oil, and hitting from left then right, then left, then right with a punch knocked it out, i can see what you mean that it is a...
i have a minor leak on my tzd, it only looses a small amount but makes a mess.it appears to come from the end of the pressure regulator unit as fluid...
Last post
Firstly there is no overhaul kit for the regulator - unlike the FDV.
You will find the official workshop manual on the link below - with some useful...
Jacking up the rear of a BX by placing the jack under the metal bar that runs beneath the rear suspension cylinder. :twisted: I know must of us will...
Last post
Good size adjustable spanner on the bar will bend it back, and some chemically self-amalgamating tape will repair the gaiter (Maplins, £6.95 a...
Just wondering if anyone knew the sizes of the metal fuel rails under the BX 16v? One of mine is proving miracles do still exsist by not leaking when...
Last post
The Citroen steel pipes may have collars formed on the ends which assist the sealing of the flexible pipes. It would be difficult to get a good seal...
Hoping people can throw me some suggestions here. I've got an intermittent grumble coming from somewhere. It's hard to track down exactly where from...
Last post
Well, Billy's getting very nifty with the spanners these days, and he's in Chester too!
I dont plan to be up that way for a good couple of months,...
Next saturday I shall be changing the TZD's alternator in a pub car park 50 miles from home. If anyone can post about how to go about this I shall be...
Last post
Did mine recently, fairly sure it's a 21mm underneath...
I just changed the brush pack on mine, so I didn't need to take it out although I did...
I've cleaned out all the air filter/air intake housings/hoses.
They were really dirty, and I recently replaced the air cleaner element, but that got...
Last post
Personally I would avoid flushes of any kind unless you've cleaned out the oil pump gauze. Nothing worse than a flush picking up crap and blocking...
Not posted for a while, since my bump in December. But thanks very much to Vanny, Cavmad & my brother the old girl should be back on the road later...
Last post
Thanks Ken,
i did a search earlier and found my last Battery topic . i do have an 063 on at the moment, but i will go for the 065 as that is what is...
Hi ,have recently purchased a 93 Gti 19 in exc order.my son & i wish to Pimp it up a bit 8) ,ie exhaust rear box for sporty sound side skirts? Do you...
Last post
If you want to pimp the body just fit 16 bumpers and sideskirts.
Got a slight prob with stalling - always when going uphill! Any ideas?
Last post
There is an anti-stall adjustment on the Bosch pump - worth checking it. Instructions are in the Haynes Citroen Diesel engine book (I'll send a copy...
I have got a good little ZX but it hasn't come without it's own problems and annoying little things. I had the car for...
Last post
With the heater flap issue I think you just need to locate the other flap and somehow fix it in the required position, I did not take enough pictures...
Upon starting it last night for the first time since snowy Thursday, the idiot red overheat light and STOP light lit and...
Last post
More likely the switch has failed then. Easy to change, easy to check, pull the plug off and bridge it out, if the lights come on, viola, you need a...
Morning. For the last couple of days, the red STOP light has stayed on once the car is running, along with what I presume is the radiator light. It's...
just out of curiosity i have a tzd turbo 1769cc with the clutch gone what would happen if i was to put a none turbo clutch in or any other bx clutch...
Last post
Will do mate, shouldn`t be too far away now it`s just that all my free time is taken recently :cry:
I`ll let you know soon as mate.
When I had my puncture, I dropped down the spare wheel cradle in a hurry and managed to completely unscrew the raising/lowering bolt from the hook...
Last post
Probably a good thing Mark. When I worked for a couple of tyre firms it was a nightmare trying to undo these bolts from where some ham-fisted turnip...
it looks like im stuck with the old bus as i can not sell it so i might aswell repair it and use it as its not a bad car its growing on me a bit of a...
i have removed the gearbox from my hurricane to change the clutch and have broken a pice of cast of the gearbox were the o/s drive shaft goes in will...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
